Hello All and shooter64738,
Thankyou everyone on the cnczone forums for the inspiring and helpful information.
My question is for all but specifically to shooter64738, would your code for the...
Type: Posts; User: MMTechi
Hello All and shooter64738,
Thankyou everyone on the cnczone forums for the inspiring and helpful information.
My question is for all but specifically to shooter64738, would your code for the...
Not sure if you are just making finishing passes or multi locations but here is a sample of how I have used it.
I inserted your program but edit as needed.
%
O00 (PROG DESCRIPTION)
G54 G17 ...
Surfcam post -Dynapath 20, Delta 20 TE lathe output
Hi all,
I am in need of a Surfcam post for a Dynapath 20 or Dynapath Delta 20 TE in lathe output.
Any help would be much appreciated. I...
Hi all,
I am in need of a Surfcam post for a Dynapath 20 or Dynapath Delta 20 TE in lathe output.
Any help would be much appreciated. I need to try and have my lathe up and running asap.
If...
Hi all. I have purchased and older (1987) Daewoo Puma cnc lathe with a 6T control (Fanuc?) to add to my shop. I have 2 newer Haas cnc mills but haven't run a cnc lathe in a long while.
I use...
Did you guys ever get your Haas monitors replaced and working with LCD screens. I have a monitor on my 2001 TM1 that is not displaying anymore, or it takes hours for it to finally come up and...
Hi Pondo, Thanks for the reply.
I have a haas vertical mill. I do understand and have used your methods. I guess I am just being lazy but I want to try and avoid having the WPC stated more...
I post my programs using work coordinates G54 thru G59 from surfcam. After I run or setup a part the tool moves to a clearance location based on the work coordinate G111 called from a sub routine...
Part Zeroing - Anybody have a easier method than this
- I Don't have macros
When trying to find the center of a rectangular part, I use these steps:
1. touch off on the right side, zero DRO,...
Thanks for the response dertsap,
In regards to the tool setting and probe, I am most interested in scanning surfaces. I figured if I had the probe and macro capability to do that, the tool...
I know this might sound crazy but I need/want to have the capability of running macros, a 4th axis, scan probing and automaic tool-setting on my perfectly good Haas TM1, with 10 spot tool changer and...
I am looking for a source for larger diameter timing pulleys, (6.5 in to 8.0 inch dia with 80 to 90 teeth) and the complimentery smaller dia pulley (around 20 to 24 teeth) anywhere from 3/4 in to 1.0...
Hi Scallops,
Thanks for your reply, I tried your suggestion in my postform.m file but it doesn't output in the format style you describe. maybe you could copy/paste your post here and I will...
Hi Sinderal,
Thankyou for your help, I like what you have in your post and am going to try and utilize some of what your post can do into my own. Where can I read more on how to do the file...
I see in the Haas manual a G53 is a non-modal coordinate selection though I don't see a way to capture a random location and designate it as the place to got to for part clearance. I do not have...
I tried what you suggested but that is not quite what I am looking for. I still either edit in my operations list or in the nc code, and I use/have a 10 pocket tool change, so the numbers don't...
I post my programs to multiple size mills. I would like to use a common sub routine call that "moves to a operator select location at the machine" .
What I currently do is move to a suitable...
I want the Surfcam mpost to output the toolheader information for each toolpath in an operation list, even if it repeats the same tool. This way I wouldn't have to post multiple times then copy and...
I would also be interested. How far are you along with a working interface?
Would this only signal/initiate a positional index or does it do more? Will this work with just the available user...
Here is what I wrote and use for a warm up program. No macro, but it does use an internal sub - edit as needed.
%
O89998 (TM1 TABLE WARMUP)
G110 G17 G40 G80 G90 (SET G110 AT CENTER OF XY...
Al, yes I can jog and use the handwheel. I had tried some data input and did include a EOB but it did not look like it accepted the command line.
Cycle does not come on.
I was thinking of saving...
I have picked up and older Puma 6 with a Fanuc 10T control. The manual doesn't have much for programming samples and is a little vague as too what menu screens I should be looking at for different...
dcoupar Do you have a Fanuc or Mitsubishi control?
It is a Puma 6 with a Fanuc 10T control
Did you ever locate manuals? I have a service manual.
I too have picked up and older Puma 6 with a Fanuc 10T control. The manual have much for programming samples and is a little vague as too...
i have always disliked having to send multiple programs ( main and a sub) so i created my own structure of program and which included sub programs. this makes for a single program download and easy...
Marc, Based on what you have described about your laser with an articulating arm and trying to envision a method of holding the laser head in a modified tool holder or clamp to the spindle head that...
I have been reading your post and I am interested in adapting a laser onto my Haas vertical TM1 cnc mill. It has a woking area 30" x 12" and 16" in Z
...
Hi all,
What a great site, so much information. I own a small machine shop (Haas cnc mill, Cnc Lathe & standard manuals) and mosty do small production and prototyping. I really like reading all...