CAps are drying out on the board. Replace all electrolytic caps and cleanup/ reflow solder joints that appear dull. If You have no experience in this kind of work, I recommend that you find a TV...
Type: Posts; User: Andrew M.
CAps are drying out on the board. Replace all electrolytic caps and cleanup/ reflow solder joints that appear dull. If You have no experience in this kind of work, I recommend that you find a TV...
Rich,
If you can print the program, You should also be able to connect it to a laptop and using Hyper Terminal download the .txt file for record keeping.
In HT, create a new file call it Hurco (of...
Rich,
The replacement for the DS1235YW is now DS1230Y-150, I got mine from "Future Electronics" in Duluth GA . Pop the old ones out Pop the new ones in, and You are good to go.
I guess Bloke...
Rich,
If is still OK after 20 Years, make a backup of Your screw map right away, there is a sequence to follow in order to get to that page " Enter ### Enter " from the start page ..I think ...? ...
:confused:Unless You have a modified board with external replaceable batteries, Ultimax2 memory board rely on the S-Rams for memory retention ( Batteries are in the S-Rams).
Could the note You made...
Darren,
How did the inspection go?
A.M.
Darren,
First of all I would check the couplings between the servo and the ball screw and the external encoder and servo. Pay special attention at the encoder to motor flex coupling for loose...
Ziggy,
Just found Your post..
Did You find a solution?
It sound like a setup problem, which toolholder # are You using ?.. try #1
Let me know , tomorrow I will copy the parting tool setup on mine...
Here is my question. On my "new" 1988 QT15 T-2 I just realized that I have a standard 16 programs ( 500 Lines ) memory, No bubble ! I need to find a way to store programs, and be able to access them...
Gar,
Thank You for Your help, as soon as I get the assembly working, I`ll post again with all the info.
A.M.
Gar and Al,
As stated, " I`m tring to find the specs for a servo motor to fit an S5C indexer controller"
I do not have a any rotary device, but just the controller box.
What i`m trying to find,...
I`m tring to find the specs for a servo motor to fit an S5C indexer controller I recently purchased.
The unit has a 14 pins motor connector in the back for The Motor supply/feedback (motor power ...
:wave: Hi,
I recently purchased 2 Haas S5C indexer controllers, ( E-Bay ) but the exitement of the purchase quickly dissipated upon receival of the two units.
The two controllers were so dirty...