Up.
Type: Posts; User: jirkamm
Hi.
JINAN JCUT CNC EQUIPMENT CO., LTD
No.40 Hua Yuan road, Licheng District, Jinan, Shandong China
But they also communicated with me from:
Add.Tianqiao District, Jinan City, Shandong...
I'm still fixing bugs made by the manufacturer.
Catastrophe.
I'm still fixing bugs made by the manufacturer.
Catastrophe.
Hi.
I do not understand.
Manufacturer - J-CUT will not comment on this?
In that case, he agrees with me.
https://www.cnczone.com/forums/chinese-machines/391406-cnc.html
Hi.
Yes, I'm from CR. I think there will be more of us.
Jirka
Thanks.
It's already fixed. Tolerance after repair 0,03 mm.
Weighting I dare not guess.
https://youtu.be/7S-RHHUhzZI
https://www.cnczone.com/forums/attachment.php?attachmentid=430118&stc=1
Hi
Probably the same
https://www.aliexpress.com/item/1772203177.html
Jirka
https://www.cnczone.com/forums/attachment.php?attachmentid=430094&stc=1https://www.cnczone.com/forums/attachment.php?attachmentid=430096&stc=1https://www.cnczone.com/forums/attachment.php?attachmentid...
https://www.cnczone.com/forums/attachment.php?attachmentid=430078&stc=1https://www.cnczone.com/forums/attachment.php?attachmentid=430080&stc=1https://www.cnczone.com/forums/attachment.php?attachmentid...
Hello.
Ihate writing but you have to see this.
Ifit would help one of you, I didn't write this unnecessarily.
Hereis my experience buying a 1325 CNC router from China.
It is true. I will have linuxcnc and Beckhoff EL3064 and EL4004 there. That could work.
Good idea.
Thanks
Yes. I need to dynamically. I told the supplier that I needed it this way. The supplier said - ok.
I see that I can throw away the VFD.
Thanks
Please send it to [email protected]. Max. 20Mb.
Thanks
Jirka
Hi.
"And no you would not use any of the relay output for a Pot" (I don't understand this sentence)
VFD is used to control the vacuum pump power for the vacuum table. I need to adjust the power...
Next, I need to set to control the pump power with an external potentiometer.
Hello.
I need to set - "device error" for relay output 1.
Set to relay output 2 - "device on" output
For analog output I need to set - output "Current frequency" - 0-10V.
But it probably doesn't...
ZONCN
Thanks
Hello everyone.
I need a manual for VFD ZONCN NZ200.
I wrote to the supplier. I wrote to the manufacturer and no one answered me.
Can you help me please?
Thanks Jirka