I'm looking for a lower HP waterjet pump.
Only have power available for 30HP Max.
Currently running a 20HP OMax P2040 on a Omax 55100 @230v 3PH.
Prefer 230V over 460/480v so no step up transformer...
Type: Posts; User: gpw123
I'm looking for a lower HP waterjet pump.
Only have power available for 30HP Max.
Currently running a 20HP OMax P2040 on a Omax 55100 @230v 3PH.
Prefer 230V over 460/480v so no step up transformer...
I spent a lot of time on that but eventually gave up which wasn't easy for me.
Multicam was not helpful at all and flying someone in didn't seem worth it so I ended up
removing the control and...
I am about to disassemble a Omax P2040 pump and before I do I'm hoping someone can provide some pointers.
The manual I have isn't the best but appears to be the original that Omax supplied.
They...
I am getting ready to transport a VF-0E and making some tie downs to attach to the leveling screws.
The manual says the leveling screw nuts are 3/4"-11 . I was going to get some extra nuts but can't...
I'd like quotes for the attached pdf .
The spindles are turned from steel 5/8-8 acme threaded stock.
Ongoing need anticipated but would like quotes for qty's of 100 & 300 or something in that...
Does anyone have information on the M24-5 board?- a manual, trouble shooting guide...
I hoping to find more info on what the indicator lights mean etc.
I have one next to "Servo Fault " and others...
Well I got things working as it did before errors showed up with the help of a couple different people and new files (Thank You!).
So now it boots up OK.
I still need to change Modbus ? parameters...
Here is another couple screen shots showing an error messege.
I am guessing that somehow gcode got placed in the flash memory with the
parameters etc and "gets in the way".
This based on what...
I recently purchased a Multicam MT22 that I have rewired from 480v to 230v and installed a new inverter.
I had things working pretty well and after many long days of trial and error got the...
I am looking for a laser for marking a 7" x 8.5" area on yellow zinc plated steel parts ( need contrasting color - a dark brown).
I had samples done with a Epilog Fibermark that look good. (not...
So I looked in my photocopied manual for the Shizuoka and noticed in the notes section of the part number for the nylon gear (99) 05110380 there is a number that is unreadable on my copy.
It starts...
Well I just finished my retrofit of a Shizuoka AN- S mill and after a few hours of fun it shed a few teeth on the nylon gear
in the head . I rebuilt the upper part of the head but thought the gears...
I am looking for someone to supply parts cut from 10 ga. cold rolled steel that are engraved with lines and numbers.
I have attached a photo of parts I do on a CNC plasma cutter with a pneumatic...
Please send quotes via Private Message on this site. If you are not able to let me know.
Thanks,
Tim
I posted something a while back but have now made changes.
I need these made from 6061 Aluminum.
I am interested in getting quotes for 25, 50 & 100ea.
The through-bore is not critical -needs...
Sorry for missing info . I will re-submit. Thanks for input to all who responded.
Please wait for changes before responding.....
I am looking for a quote to machine some 1.75" aluminum square bar stock , cut into 4" lengths, bored , & drilled and tapped in four places.
See...
Thank you Keebler303 and others who responded. I have decided to re-design this with a open-ended slot that can be machined with a slitting saw .
Therefore, I am closing this RFQ .
Keebler303,
Yes, I see now I was optimistic with those tolerances. Any idea what tolerance for the .049 slot would be possible? +/- .005 ?
(Drawing dimensions should have been + / - .002 not +/+...
I need some small aluminum bronze parts made but am not sure if its possible with laser or waterjet.
Attached is pdf of the part. The slot may be too narrow and/or material too reflective for laser?...
I am looking for quotes for a turning job. They are acme threaded rod with the end turned to accept a swivel pad.
I would like a price for qty of 100 & 500 pcs. . Attached is a simple pdf of the...