Search:

I appreciate the responses. Thank you to all. I ended up figuring out the problem. My 'Steps per' values for the X and Y axes were slightly different. I originally calibrated both individually...

Thanks so much for your replies. I have some additional information. I scaled the model down so I could make some quicker test cuts and I cut 2 pairs. I attached a photo. One pair was cut vertical...

Hello, I am having an odd issue and wanted to see if anyone has experienced anything similar. I'm not completely sure if it's Mach3 or Fusion 360, or maybe even something else. I have cut these parts...

Has anyone had issues with having to calibrate an OMNI CNC router? The machine came with the default units set to mm and I am aware that users are not supposed to change the units under ‘select...

I was able to find the correct driver and got my machine running on all axes so I no longer need assistance with this issue. I do have another question though if anyone can give it some...

Hello,

I have recently received my CNC Router machine from OMNI. I have connected the machine to my PC via USB cable and the computer/mach3 does not detect it. Zach from OMNI told me there is no...

Thank you so much for your knowledge and assistance. I wired the a hot leg to the L1 and the other hot leg to the N terminal and the machine turns on. Thanks again.

Hello,

I have recently received my OMNI 1315 CNC Router and I am unable to use it because I am uncertain as to how to wire it. My machine is single phase 220V. I am in North America where we use 2...