Search:

Hello to all. When we rewind the winding of one of the axis servo motors, in many cases we have to change the polarity of the motor to the standard u v w state. Is there a parameter for this in...

The control system is FANUC 15 FFT machine and MORI SEIKI ZL 25 machine

HI
I have a MORI SEIKI ZL that has 2 TURRETS. Considering that I am not using TURRET 2 and also TURRET2 is defective due to mechanical problem. How can I disable TURRET 2 so that it disables both...

Hi
I know that parameters 3741, 3742, 3743, and 3744 are for gear change and the maximum speed of each gear. And parameter 4020 is for maximum spindle speed. But my problem is when I change...

Hi
I changed the parameters of 4002, 4003 and 4022 in different ways. But none of them were effective. Please guide me further. Is it necessary to edit the PMC program?

This is my machine tool model.

I set parameter 4002 equal to 00000100 and also set equal to 4002=00000010. And I tested. There is still a problem.
Shouldn't another parameter be changed?

The machine has 3 gears and the gear ratio is 1 to 11, 1 to 3 and 1 to 1.
I can see the spindle and motor speed on the screen.

Hi
My machine has an optical encoder and its rotation ratio to the chuck is one to one. It also shows the real speed on the screen..
All bits of parameter 4002 are equal to zero..
4002=00000000

Hi
How can I change the feedback path to chuck?
Does fanuc 18-m control system have this capability?
Do I need to change the parameters or do I need to edit the PMC program?

Hi
I have a Daewoo h63 machine tool with 18 Fanuc control system.
In normal mode, there is no movement with g01 when the spindle motor stops.
But when the gear shift shaft becomes defective and...

HI;
I have a machine center H63 Daewoo.

Does anyone have a sales catalog or other catalogs for the machine ace 63?
I need the standard speed of the axles of 1420 and the standard speed of ATC...

No.

Hi
I use A20B-0130-K101 battery for the b-axis of one of the machine tools. Now this battery is hard to find. I replaced some other models of batteries with a voltage of 6 volts, but they did not...

Hi
I have a machine tool. The x, y, and z axes are moved by the handwheel, but I cannot move the b axis by the handwheel. I think the settings or the program have not been done for this. What...

Hi
In one of my machine tools, I have used the parameter 1008-bit 1 to rotate the table in one direction due to the table error and failure to correct the mechanical problem of the table. But...

Hi
In the 18m series Fanuc control, the spindle rotation is monitored using 3715 and sar parameters.
But these parameters are useful when there is a mechanical connection between the spindle motor...

Hi
A02B-0247-B805
E01604829
Vs
A02b-0247--B755
E99204533

I have a danobat machine model rcu which; has stopped due to the failure of the control system. The model of the main control system is a02b-0247-b755
I want to replace the new model
Is the model...

Wouldn't it require a new sram and pmc program?

Hi
I want to change the control system of my Danobat machine, the current control system is a02b-0247-b755. The control system suggested to me is a02b-0247-b805.
What is the difference between...

?
This is not my problem.
I am familiar with the Fanuc system.
I want to know the logic of setting the index table with parameter 1850?

I have 40 of this type of machine and the parameters are different numbers. There are from negative 12,000 to positive 15,000. My problem is that every time I enter random numbers to set the b axis...

The number of parameter 1821 is 2000 in my machine.
When I divide by 360, it becomes 5.55556.
That means it changes one degree for every 5.555556? Why is this not a rand number?
On what...

Hi
How to set the 1850 Fanuc parameter. ? In the rotary axis, how much is the change of this parameter equivalent to one degree?

Hello; I have a machine ( h63 deawoo) that has a sinumerik 810d control system. The problem I have with it now is that the spindle motor stops quickly and without interruption when it stops (reset...

Hello; I have a honing machine with gehring element control. The machine is designed and built for the Porsche engine. Now I want to start up the machine for another engine. Our honing has...

Can you explain more?

The encoder counts all the actual revolutions of the spindle.

Our spindle has a position coder, can't we use it?