508,588 active members
3,344 visitors online
Register for free
Login

Search:

Type: Posts; User: ALLANG

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    120

    Re: 5x10 plasma table purchase

    Have you tried multicam Canada. I had a 5x10 plasma with a hypertherm 125 that I got brand new (used) in a box for around 30k.
    It is a simple machine (and simple to operate) but I cut 1.25" hrms...
  2. Replies
    4
    Views
    460

    Re: Amada LC1212 A2 with fanuc series 16L

    Gauge blocks are usually the stoppers for the sheet metal. Located on the end of the table and near the clamps. White button under the e-stop on the end of your table should be the gauge block...
  3. Re: "PROGRAM LOAD FAILED DATA ERROR" Fanuc 160i pc/windows interface Cinci CL-6 lase

    Problem solved. Thanks.
  4. centering nozzle/tape shot 1mm in diameter CL-6

    Hi. I have a new problem. Since trying to swap lens from 5" to 7.5" (and back) I have not been able to
    center the lens/nozzle. The beam appears to be centered but because the hole it makes at 50...
  5. cinci laser fanuc 160i "LOAD PROGRAM FAILED DATA ERROR"

    Hello. I was hoping to get some help here seeing as though everybody else I have talked to has been
    somewhat stumped on what I am assuming should be a simple fix.
    My problem involves a used cinci...
  6. fanuc 160i pc interface "LOAD PROGRAM FAILED DATA ERROR"

    Hello. I was hoping to get some help here seeing as though everybody else I have talked to has been
    somewhat stumped on what I am assuming should be a simple fix.
    My problem involves a used cinci...
  7. "PROGRAM LOAD FAILED DATA ERROR" Fanuc 160i pc/windows interface Cinci CL-6 laser

    Hello. I was hoping to get some help here seeing as though everybody else I have talked to has been
    somewhat stumped on what I am assuming should be a simple fix.
    My problem involves a used cinci...
Results 1 to 7 of 7