I'm in Canada, actually. I run a makerspace in Victoria, BC (https://makerspace.ca/). So most of the users of the laser cutter are hobbyists, small business folks, etc. I usually get my cermark from...
Type: Posts; User: derekja
I'm in Canada, actually. I run a makerspace in Victoria, BC (https://makerspace.ca/). So most of the users of the laser cutter are hobbyists, small business folks, etc. I usually get my cermark from...
I would be interested!
Cermark is way too expensive. I don't use too much of it, but it would sure be nice to have an alternative I could make myself.
Oooh, that's an old one. 21 years old, in fact.
I've built (and rebuilt) a few lasers and don't know what he means by a "laser eye". If he means the laser source that's expensive. If he means the...
608
software is here: https://www.sinjoe.com/index.php?route=product/product&product_id=96
No issue at all with your reporting the problems here. That's a benefit to the community. Reporting to the FDA and AG's of Nevada and Washington, though, is pretty ridiculous. Why encourage intrusive...
When our fse jams like that the belt takes a lot of abuse. That's what I'd check...
nice looking machine.
If you want something that would be sufficient to prevent freezing but is less than a heater, you might consider a heating pad. I'm not sure I'd use one meant for people,...
Even 80 is high for mostly engraving. It'll work great, but may be higher than you need.
As a data point, the TechShop in Menlo Park has 3 Epilog lasers, one 60W and two 45W.
Just an indication...