Search:

look up parts and smarts in wi. we used to use julius before he passed away they can help u out i think right on the edge of the power suply is the voltage for each terminal of the output some are...

THEY SELL THEM AT HAIR SUPPLY STORES FOR BEAUTY SHOPS THEY ARE FOR SHAPERS I THINK KIND OF LIKE THE SIZE OF A STRAIGHT RAZER

i use one every day the mehtod i use is a dnc type . first you type cd,10 + to set the baud rate then type dnc,(the file name).nc + that will load the machine then you hit start button if you...

maybe the cd,10 part first thats what mine uses

i am sorry to hear that. now who will we look to for our support I did not even know he was ill do you know what happened to julius
don nelson

I THINK THEY ARE RIGHT ON THE EDGE OF THE BOARD -5 VOLTS + 5 VOLTS
THE BEST PERSON TO ASK IS PARTS AND SMARTS JULIUS IS HIS NAME I CAN GET HIS NUMBER TOMORROW VERY GOOD WITH DYNAPATH CONTROLS

I THINIK YOU MUST FIRST MOVE THE AXES AWAY FROM THEIR STOPS THAN HIT R THAN MOVE EACH AXES BUTTON TOWARDS THE STOP IT WILL TAKE OVER AND HOME EACH AXES BY ITS SELF FOR EXAMPLE YOU MUST LOWER THE Z...

what year is the machine if it is a 88hs control i will help you out
don nelson 660 651 9190 cell

while cutting push cycle stop hit jog adjust your z up or down hit auto it asks what do you want to do retrurn axes or shift and run choose shift and run you are now at your new depth is that what...

GIVE ME A CALL AND I WILL WALK YOU THROUGH THE SET UPS WHILE YOU ARE AT YOUR MACHINE AND ME AT MINE

DONNELSON 6606519190

how are you getting along with the exercises

donnelson

you need to get a hold of mike matera he advertises right here on this post he will fix your post for minimal amount of money just pay the man it is worth it to know that it is right he has helped...

i am in missouri north central area

donnelson

if it is a cnc 88hs control i will help you out
don nelson

if you would like you can call my cell 660-651-9190 on monday and i will walk you through it once you see it done you will see how simple it is call when you can be right at your machine and me at...

whay version of mastercam are you using

get ahold of calmotion and buy the box that hooks to the rs232 port at the rear of the machine you load the program to a thumb drive insert it into the port that comes with the kit type cd,10 enter...

i have a post for a dynapath delta 40 if that will help you out
let me know if you want it it works great on my machine it is a millport 40x20

looks like the drive is bad i gave them a call practec said aprox 1500 sending it out thank you for the help please send cash thanks donnelson

i have a 96 vmc 15 the spindle wont start when i push the start buttons i hear the air coming through the spindle but no movement. i looked at the baldor drive and the screen is blank with no back...

i have it for a hardinge mill if that will help out it has a 810 d

it goes on the cover that is ontop of the carousel on the side by the left side

give calmotion a call they sell a little black box that hooks to the rs232 port it is preset to the machine you just put your program on the usb stick shove it in type cd,10 then enter then type...

i keep a extra 1 the part # comair rotron 626679 115 volts ac model mr2b3 off of the back of fan let me know and i can ship it to you in the am if it will help you out the fan is new the...

i have a ec 7050 machine the same year it has a rs232 input that we use to load programs from a pc i have a mastercam post for it the machine is good but is slow and is hard to start cuts from the...

you will have to have some type of program to dnc whether it be fadal assist or fadal nc or you can spend a few bucks with calmotion and not need a pc to your mill which can lead to lightning to...

i have a 1000 used it for quite a while then noticed it seemed to be going through a lot of ht e nozzles not so much the electrode but lots of the nozzles. I talked to a guy he said to take the outer...

I sent that to you do you need it again if so leave your e-mail i got it from hardinge it is a version 7 but you can update it in your c hooks let me know

turn on machine push green button push jog select z jog to align the marks on the right side of z column select y this 1 is a littlle tougher there is a piece of sheet metal on the right side down...

give calmotion a call they have a unit that plugs in to the rs232 port and has a lead that you install at the control pad that excepts thumb drives load to usb thumb drive stick it in the port and...