381150381152 Can anyone tell me if i can use a aduino hall effects sensor with a chinese 5 axis controller?Im using the a0,5volt and ground on the hall effects sensor and limit 15 ,ground and 5...
Type: Posts; User: recoton
381150381152 Can anyone tell me if i can use a aduino hall effects sensor with a chinese 5 axis controller?Im using the a0,5volt and ground on the hall effects sensor and limit 15 ,ground and 5...
I figured out the wiring on the 3 axis,it wasnt to bad .I used a tb6600 all in 1 controller and it work awesome ,I also added a forth axis.If anyone need the wiring pm me and i will get it to you.
I need some help on the wire color codes of the steppers and limit switches.I seen that other people have redone theres and i would like to see there wiring diagram.Im using the same power supply and...
I need color code of + and - wires for x y and z ,if i can get that info.I know there have been quite a few retrofits ,I know the red and white wires on the z wiring are for the z limit switch.If...
Look up minibloq in your browser and you will find a free program that does aduino graphical programming.
I cant really use coolant because i am doing it on a bridgeport and some of the
lexan i use has a paper coating,also its for lockheed martin and its cannot have scratches of any kind.i found that...
Has anybody got any advice for me i have been using key cutters to start with and didnt have any luck.i know there is no geometry in a cutter like that but that was how they did it before i started...
Has anybody ever heard of rewiring and using a printer controller board or would it be a lot less hassle to make my own controllers
basicly the machine works like a tracer it has a bottom table and a handle on a back spindle,about three pieces put together on bearings and a slot to follow the contour of your template.the diamond...
Our shop purchased 2 glass cutting machines from a guy in new jersey and we have templates we made from a cnc router.the drawback for cutting the glass was we couldnt cut intricate designs so we...
Sir call Eck Plastic Arts which is in Binghamton New York i'm sure we could help you out we have done various project like yours before.The number is
607-722-3801,i am a machinist there ask for help...