I have followed the reset procedures outlined in the Hardinge maintenance manual M-393C pages 8-36 and 8-37
to the letter 4 times. I even powered down the machine via main switch and it didnt...
Type: Posts; User: bschris
I have followed the reset procedures outlined in the Hardinge maintenance manual M-393C pages 8-36 and 8-37
to the letter 4 times. I even powered down the machine via main switch and it didnt...
I have a Hardinge Conquest 42. I believe it is a 1989 model year with a Fanuc OT
900 00111110
901 11010000
902 00000100
903 10000000
904 00000000
905 00100000
906 ...
Hi my name is Chris I have been a machinist for 30 years. Currently I set up,program, and run 3 Hardinge cnc lathes for an areospace parts mfg company in Flint Michigan USA.
I have 20 years...
Try Rovi 800-423-5145 I saw a flyer on my production managers desk for a new line of tool blocks for lathes.
Thanks!!! I will post questions as they come up.
I am presuming this is a lathe because it has an OT control not a machining center which would have an OM?? To home it you should be able to jog it a minimum of 1 inch in X axis toward spindle...
My production manager called Gosiger and they called Hardinge who said it was parameter 4024 S2. I used a test program that Gosiger e mailed and then adjusted the parameter until the alignment was...
I am attempting to transfer 3/4" hex part in main collet to a same size hex collet in sub spindle.I cannot get the flats of the hex to match up! I am not
at work as I post this so I can't quite...