Search:

Does anyone know the timkin brg Number for the lathe Spindle

I used two dynapar rotary incremental encoder that I picked up at a local junk store. +5 volt with A+,A-, B+ B- I think I got the wiring somewhere in the Mach3 manual. I had to setup a drag on the...

I have mine setup that way. works in both Mach3 mill and lathe. It will also move both X and Z axis at the same time by turning both MPG's at the same time. It has been a long time since I set it up...

Sergio,

Sorry I do not have anymore

Ysihonda,

I shipped you three boards on standard post on Monday March 16. It may take the postman awhile to swim the big pond, but they are on there way.

Have fun with your project

Jim

yes I have that board send me a private message where to send it.

Ysihonda,

I might have the part you are looking for I will check tomorrow and let you know. Can you post a photo of your board?

Hi,

I have a Toshiba RA12m 1500 watt AC servo motor and I need the wiring Schematic. I have Googled this motor to death and can not come up with anything. If anyone can help I would be forever...

RCM,

I have one complet and working, BUT the spindle moter will most likly need bearings and brushes and the speed pot will need replaced. The only problem is see is that i'm in Ohio and I think...

I also have two 2400, One is complet and working, the second is in parts.
I also have a manual that I can copy if it's not against the rules

Jim Geib

mackey,

Thank you for the up date, that core drill sure looks like the hot setup. That's a lot of hole down that plate, I don't think I will have that many in both of the rails on mine. What'ya...

Thanks for the update. I like your Idea for the inserts and the core drill.

Jim Geib
Mansfield, Oh

mackeym,

When I setup my smithy I checked it over about 10-11 inches of travle and it was within 0.0005 and it has held for over a year, and like I said I used only 15mm rails. Your larger rails...

I have been watching this thread with intrest, because I am doing the same thing. Not on such a grand scale, but a 18x24 surface plate. I just gaot a Hardinge DV59 spindle and I am looking for rails...

You need one sensor on yor spindle to trigger once per rev. It is shown in the manual. I have mine setup and have cut threads several times. There is a threading wizard (simple threading).

North,


I have a Smithy 1220XL and I'm using G201's and 400 something in.oz steppers motors. I can get 40-50 in/min. I have been using them for 1-2 years and have had no problems.

JIm Geib...

Steve,

I wouldn't use business cards as shims, get a couple cheap feeler gages the fold out type. The business cards will give to much while cutting. I would stick with HSS tooling and learn to...

Craig,

You are trying to spin the stepper to fast. The higher the RPM the lower the power. Or you may have the acceleration set to quick. I am using Mach3 software and on motor setup I can adj....

Take a look at "Mach3" http://www.machsupport.com/

Hi, all

I am in Mansfield, I have a Smithy mill/lathe converted running Mach3. Sure is funn making chips with the darn thing.

Jim Geib
Mansfield, Oh