Search:

Good morning all,

I have a 5 x 8' wood router that I built with all gear drives (ballscrew on z) and servo motors. I run ASPIRE and MACH 3..

I have cut many signs and projects but 2 nights ago...

no it never loses position. I cut a 3d piece last night. I ran the roughing pass and the finish and it came out fine but it stalls quite a bit during all of it.

The motors do not fault and there are no errors at all. It will run the whole program but will for a split second stop and continue probably 3-4 times per pass.

I am using a Ethernet cable to a Ethernet smooth stepper ESS.

Good morning everyone,

I have a CNC wood router that I built myself. It is 5' x 8'. It is a rack and pinion set up and runs Teknics motors and power supplies. Also this axis is running a 25 to 1...

Good morning everyone,

I have a CNC wood router that I built myself. It is 5' x 8'. It is a rack and pinion set up and runs Teknics motors and power supplies. I am running MACH 3 and Vetric...

I have tried the 3d roughing, profile, and pocket.

Good morning everyone,

I recently built a 5 x 8 CNC wood router. I am trying to learn this aspire program and all is going pretty well but I do have a question. Im sure many of you have seen the...

Hello Everyone,
First time here. I have been building a new CNC wood router for my home shop. It is approx. 5' by 8.5' I have used rack and pinion on X and Y axis's and a ballscrew on the Z axis....