You have to know that my control box is separate from the Machine and connected to a control panel (including the E-Stop) via wiring.
I the expectation that every input can be assigned to almost...
Type: Posts; User: hoizlaender
You have to know that my control box is separate from the Machine and connected to a control panel (including the E-Stop) via wiring.
I the expectation that every input can be assigned to almost...
Sure, I understand this. For this reason emergency buttons are normally locked in the pressed position (as mine is)
But normaly you don´t need to press the button a second time to release E-Stop...
Hello,
thank you for your response.
I changed the setting under FIle>Settings>Input/Output
Now I can avtivate E-Stop with pressing the button, but to deacticate E-Stop I need to switch the...
Hello,
I want to use a input pin to switch emergency stop.
The switch that I use is a NC. So when I adress the switch to E-Stop via shortcuts it is not working probably....
Reason is that the...
Hello Newbie,
did you ever type M62 P4 Q1 in the MDI?
This switches output 4 to "on".
M62 P4 Q0 to "off".
Hello SkiPatrol,
thank you for your quick response.
Even not knowing much about scripting I managed it to switch a relay on the EXT relay board by typing M3 in the MDI and switching it off by...
Hello,
I have questions about the use of input and output signals via the ExtIn board.
Several functions - like switching coolant or using a tool probe - require setting the I/O Pins in the...
Hello,
I was sure that I had a solution for that problem years ago.
So I checked past projects and found the following:
https://maxcdn.cnczone.com/images/attach/jpg.gif From Boundary.jpg (42.3...
Hello,
I request your assistance.
I want to mill a text and logo into a curved surface (depth 0.2mm).
Most of the material is removed by a 1mm flat end.
To get the corners of the letters and...
Hello,
that you for your offer. But removing and shipping would be a big effort.
Could you provide a instruction how to programm the sequence id?
I guess what you need is a raspberry -...
Hello,
same question. 1,5 month later...
Please be so kind to respond.
I saw that you changed the description of the output board. You erased the promise that up to 32 relays can be connected....
Hello,
any progress on that issue?
Slowly I get nervous because my whole plannings are based on these relais boards and their function.
Best regards,
Marc
Hello,
I am building up a mill with a MK3 bord using TNG
SW: 20.09.18
HW: 2020.09.04
Now I want to chain two ExtOut boards and don´t get them to work properly.
Unfortunately I found no...
Hello Folks,
could somebody explain me the use of the SHIFT at the MK3 Limit connector? I don´t get it....
The manual says:
SHIFT OFF: Axis 1 to 4 limits are selected
SHIFT ON: Axis 5 to 8...
Dear Andrej,
thank you for the hint with the template M6 - even when I don´t understand much.
For the 1st step I will bulid it and come back if I don´t get it working ;-)
Best regards,
Marc
I think it is no failure to explain my project a little more.
At the moment I am modifying a Hermle FW 800 to a 3-axis CNC.
Axis X, Y and Z- are already equiped with servo motors Type Bautz E728....
Hello all,
I have already one CNC milling machine with an MK2 board in use and I am pretty happy with it.
Now I am building a second one and I want to equip it with a rotary type tool changer....
Hello Dan,
I think it is more a problem of displaying the window then one of the language.
When you have a look at the screenshoot above you see that the box to enter the value of "Rais Z of...
Hello there,
I am using File version 5.0.2017.1031 (prerelease) with Win7.
When I want to use the function " along curves " I can select the curve and the appropiate madcam window opens but the...