Search:

yes it works great except for when i run a large 3d contour program it can not keep up and the machine has to wait to get fed more code. is there anything that i can do to speed up how fast the code...

i have a 98 bmc4020 with the ultimax control. i am having a issue when running a g&m program and am not sure if its code related or memory related. when doing any rapid moves it is real choppy and...

i am having a issue supplying my CNC mill with power when ever it does a spindle ramp up, this has been a on going issue. i have an american rotary adx40 phase converter that was recommended for this...

Doesn't get much easier than that! I currently am using the 3-1/2 floppy for NC so I should be good to go. Any chance you'd be able to explain how to tie into the 110v supply like you spoke of? If...

Thanks for the reply Steve, I have never fed the hurco through anything other than the 3-1/2 drive. Would I just set parameters to X-on X-off and to upload the program? Then it will know to pull from...

Is any one drip feeding their Hurco max or ultimax control? I just spoke with Jerry at highland DNC and he is unsure of what is needed to drip feed a hurco from his shop link and would like me to...

finally got a hold of tech support and it ended up being a blown fuse. i hope it was a fluke and didnt blow due to another issue. i will keep you posted when i find the replacement fuse, thanks for...

I have encountered a power situation with my hurco, the machine is a 2005 hurco vm1 with the max controller. I turned the power on tonight and nothing powered up so i opened the cabinet and the only...

thank you for the response. ill give it a shot and i will get pads just for extra caution

I am going to try posting this here? Im new here and looking for some advice on the thickness of a concrete floor needed. I purchased a used hurco bmc 4020 and am going to be putting this in my home...