I would like to monitor terminal 5(error/reset) remotely with visual indication leds (green and red), so my question is how much current can I source/sink on terminal 5 without activating terminal's...
Type: Posts; User: kansaswoodrat
I would like to monitor terminal 5(error/reset) remotely with visual indication leds (green and red), so my question is how much current can I source/sink on terminal 5 without activating terminal's...
thanks...here is what i did
449908449910
First time I have attempted concave milling cut in fusion 360 on DIY cnc mill using mach 3. So far
no matter what I try toolpath does not generate to my needs for part. Not even sure if this is 2D...
New flexible couplers have been installed, along with complete cable replacement due to splices in middle of old ones and
sheath grounded on both ends(motors and controller box). New ones sheaths...
yes they were the spring type. 6.35 to 10 mm are the plum type which resemble lovejoy couplings
free of backlash. Wondered about how much expansion and compression the flexible material would...
Well went out in garage to test some of the possible fixes, and jogged the mill to somewhere near center of bed and notice it
was making funny noise, and wouldn't you know it, the aluminum flexible...
No question is stupid...been there done that. Anyway, yes I do know the difference. I use G56 and locate it somewhere near the
center of mill bed for nubie safety. I also change the gcode from G54...
I change the G54 to G56 and identify that location on mill somewhere near center of mill bed for nubie safety.
(SERVO_MOUNT_ADAPTER)
(FIRST FUSION 360)
(MACHINE)
( VENDOR HOMEMADE)
( MODEL...
Will regenerate the gcode and try later today...thanks
recently downloaded fusion 360 and trying to design and output gcode to use in DIY 3 axis router controlled by mach3. I elected the wcs with z axis pointing up, x pointing to right, and y axis to 90...
Have 4 never used Liton Clifton Precision model jdh 2250-bx-1c motors. Recently purchased a small cnc mill(totally unknown manfacturer)
that appears to have major issues with controller. No stickers...
Post multiple video driver download/installs, I have found one on the Nvidia website that does
allow Mach3 to startup. Driver was not for my card, but video does appear to be functional??
I did...
New install of XP on dedicated PC to use for CNC router in near future. Installed Mach3
and restarted. attempts to start Mach3 all fail. I get an error msg that “NVidia opengl
driver” error....
ok, pls excuse my lack of understanding, but when I watch video's on youtube of faces, or other 3 dimensional objects
cut out with CNC routers, how is that accomplished. The depth on such things is...
Thank you. How is the Z axis controlled if only 2D drawings are allowed in lazycam. I have not purchased
the license for mach3 yet, but very soon, and wonder if some of the issues with lazycam are...
After considerable testing all the .dxf files that would not load into lazycam, I have discovered
that saving them back to version 2007 appears to resolve the issue. Based on that I assume
lazycam...
First, understand I am a NUBIE and CNC, so show patience pls. I have valid student copy of AutoCAD 2014 that I
am using for CAD program. So far I have limited all attempts to load a dxf file to 2d...