No I am not tested it jet. but I already ordered encoder and probably next month I order servo.
and my plan:
1. to make some test platform and test how good it works and what results I get. if all...
Type: Posts; User: janis93
No I am not tested it jet. but I already ordered encoder and probably next month I order servo.
and my plan:
1. to make some test platform and test how good it works and what results I get. if all...
yes, I think exactly the same. my coal is to find OPTIMAL product. OPTIMAL=best performance and $$$ relation. yaskawa maybe have sligth advantage on support or I dont know where, but if it costs 3...
I think joeavaerage first post has very good information. And yes I look for fully closed loop exactly as described, between driver and load position with dual encoder servo driver.
and I use pulse...
Is any other brand also offers servo drives with 2 encoder import for closed loop motion?
What is servo drive regenerative resistor?
When it is needed, and what it gives to my system?
Can I program this drive also via usb port, or I need the cable you pointed out?
Hello
I am planing to upgrade my nema 34 stepper system (1090oz-in) and leadshine EM806 drives 60v psu to servo system. Ballscrews are 2020, direct drive at the moment.
I want to get about...
okay, I try to mod post.
it has to wait some time i cant go to where is my cnc about 2 weeks.
but if to test cutting and comparison I will get back with results.
so situation where I need 10mm hole with 6mm endmill will result some 8 corner hole ? i dosent seems weary professional
okay thanks, i think I can try this one on weekend.
anything else i have to change ?
If I replace arcs with lines is the contour smoothness is affected ?
how I can set it up in fusion 360 ?
I want to try this one.
Maybe I can get higher acceleration something 1500 maybe but this is max i think.
When this planner update arrives any idea?
I have acceleration on 900mm/s2
And cuting feedrate 3500mm/s
Rapids are 10000mm/s
This is very anoing behavior.
In picture is my diy cnc
hello, i have problem with uccnc,
my cnc tont run smood on wery simple contour.
https://gyazo.com/e82f5f4b0f9ca09243ae0e169ba07bb4
On red circle cnc stops very vast and then almost...
Hello
I build grbl cnc and I need little more power than drv8825 can offer. So I find TB6600 can offer wath i need ( I know they are not best quality but for my hobby cnc they work). and then i...