I figured out that the solenoid was stuck. I just pushed the shaft with an allen wrench to free it up and now it seems to be working. Thanks for taking the time to all for your input
Type: Posts; User: jeffm
I figured out that the solenoid was stuck. I just pushed the shaft with an allen wrench to free it up and now it seems to be working. Thanks for taking the time to all for your input
let me see if I can attach the picture again491348
It was running fine and it went to index for the cut off tool and this is what I got
Can anyone help me clear this alarm
491327
Hi
I have a Sharp SV-2412 with the Fanuc Oi-MB control and when I try and home it the -Y- axis feeds the wrong direction. Any ideas on what might be a fix for this?
Hi
I have a Sharp SV-2412 with the Fanuc Oi-MB control and when I try and home it the -Y- axis feeds the wrong direction. Any ideas on what might be a fix for this?
I got it working and this program is really good for lazy people like me. There probably are other programs out there that do this but this is the first one I found that I can send all my programs at...
I just downloaded DNC4U to try because I like the save all programs feature. Send them all at a time and it breaks them down.The one thing I don't like about it is that I can only figure out how to...
does any one know of a good free dnc software that works on Windows 7?
So looking at this it starts Z- .150 and feeds up so if I want to go a little deeper I just have to add more of the G03 I-.1562 Z.0555 lines till the cutter clears the top of the part? Is there a...
Yes does this start above the part and feed in ?
Hi All
I'm trying to do a single point thread on my mill and I can't figure it out can someone help me out. Here are the specs I'm making a 1.0625-18 ID thread .150 deep. The tool I have is .750...
I have a simple lathe drawing and was wondering if there is a way to flip it around so the Z+ is Z face?
I attached the drawing
I have a simple lathe drawing and was wondering if there is a way to flip it around so the Z+ is Z face?
It's a Shoulder,Swivel Nut for the Air Force,Army or Navy
Thanks I'm using G92
That's what I don't know how to do
How do I adjust a O.D thread that is running .006 small in the back on a Fanuc control? The thread is a 10-32 and the problem is it's 2 inches long. I'm using a live center but it's still flexing....
Does anyone know how to reset a error 2024 turret lift status error?
Thanks for the reply's
Does anyone know about how much a 1/2 full 55 gallon drum of 15-5 solids might weigh
Hi All I just got a new computer cause the old one died the problem is it dosn't have the standard RS232 25 pin port that I need to go to my switch box. I bought a USB to Serial port cable and...
You are The Man thanks that was it I didn't think about that but I did use the "machine is down" excuse to get in a round of golf and a days fishing
I wish that was it. I didn't hit the button it went into emergency stop because it over traveled. It is sending the X axis the wrong direction when I home it
I have an OM control and I cant get the emergency stop to reset any ideas?
Its a Doosan with a Fanuc Oi. I just did it to old fashioned way I attached a strap to the live center and the chuck and moved the quill to pull it off the switch
How do I fix this alarm 2051 its tail body over travel and now nothing moves?
Thanks Matt I slowed it down and it's working again
No same stuff
When I do the chain tool path I use to see the direction arrows now I don't is there away to get them back again so I now what way I'm going?