Thank you for your response.
Actually, the shielded cable is not that mesh-type shielded cable; it is made of thin aluminum foil and has four core wires.
I've attached an image.
Another cable I...
Type: Posts; User: M.Abid
Thank you for your response.
Actually, the shielded cable is not that mesh-type shielded cable; it is made of thin aluminum foil and has four core wires.
I've attached an image.
Another cable I...
Thanks for reply u means the power cable from spindle to vfd need to be sheilded must be?
If not it will cause EMI problem.
Hello there, everyone.
my machine is a cnc router.
Because the upper skin is damaged and has come off, I'm looking for unshielded power cables to replace the existing shielded wires. This...
my question about the atc spindle es929
which is that I am using one cutting tool most of the time means not required tool change often. so closed the air supply to the machine/ spindle to save the...
Hi bro its three phase startup Amps 95 to 100 and running 15 amps continues.
Currently its directly connected to simple On / off isolator.
But planning to connect with star delta starter.
This is...
correction its 23 min not 2 min
hi
Need Help on 7.5 kw vacuum pump Chinese's water filled tank.
The temperature is while running 2 min reached to 75 degrees motor body temperature.
is this normal temperature?
the inrush...
Hi pal, Sorry for bothering you, but you're the only one diving with me and helping to investigate.
First code is L0003
Second code is L0022.
and will update u till the 5th code later
Thank...
Here is the model number of z axis drive
HI Pal
I checked the code which is the recent ONE which is L0003.
hi Pal
the servo motors fixed with a gear reducer. The error comes on even at idle on the y axis motor.
the sound / noise comes from x axis servo motor the vibration also touch to feel while the x...
Hello, I have a Techno HDS CNC router with an OSAI controller. The machine's issue is that it consistently displays the error code (Y axis servo error) EE0011. The error occurs while the machine is...
I find a link https://trakmtsupport.dozuki.com/Guide/RX+-+How+to+Check+Fault+History+of+Delta+Servo+Drives/5
:zzz how to find those codes i think look in to the manual the way
Yes the same thing came in my mind after turn off the machine and restarted.
I needed to check the code and open the cabinet. But I restarted in a hurry and with a little panic.
Will the...
Thanks pal.
Some times unintentional thing happens which we don't want ever.
The machine looks works fine nothing sound/noise noticeably different from before.
True, I forgot to mention that before pressing the e-stop button, I noticed that the z axis was not moving upward after jogging the z axis before pressing the e-stop button, so I restarted.
the...
I appreciate your response, friend.
Did you want to say that the drive's protection makes the servo motor fine? Additionally, this machine includes thick ball screws.
You give an example, but it...
Hi guys, my question is about a z-axis servo motor that is a 1 kW delta servo motor with a 6 kW HSD spindle.
What occurred was that I wanted to cut 18mm mdf, but I accidentally entered 185mm,...
Hello, I have a Techno HDS CNC router with an OSAI controller. The machine's issue is that it consistently displays the error code (Y axis servo error) EE0011. The error occurs while the machine is...
hi pal
did this problem comes after reset the parameters to default?
hi pal i also own a techno hds cnc router.
for the rpm 24000 not required.
12000 to 15000 rpm is adequate.
for v carving don't rum the machine too fast.
i u can send me the design which u want to...
Hi, I own a Techno HDS CNC router with an OSAI controller. The problem I am facing with the machine is that it constantly gives an error, which is (Y axis servo error) EE0011. The error occurs while...
Hi, I own a Techno HDS CNC router with an OSAI controller. The problem I am facing with the machine is that it constantly gives an error, which is (Y axis servo error) EE0011. The error occurs while...
Thank for the reply.
But the output from vfd to the spindle is ok all phases is present.
The problem is between the output cable and the spindle connector.
Will the vfd also detect this?
As i...
Hello.
I own a exitech atc cnc router.
Yesterday the spindle shaft not turrning but the running sound is coming from inside the spindle the
Sound was not bad.
While troubleshooting i...
Hello.
I own a hsd atc spindle es929 9kw .
Fitted on a cnc router.
Yesterday the spindle shaft not turrning but the running sound is coming from inside the spindle the
Sound was not bad.
...
Hello.
I own a hsd atc spindle es929 9kw .
Fitted on a cnc router.
Yesterday the spindle shaft not turrning but the running sound is coming from inside the spindle the
Sound was not bad.
...
Hello guys yesterdsy a cutting job is finished and i start new job to cut when i cycyle start the router the atc hsd spindle es929 tool holder not rotating.
I can move the tool holder by hand its...
The atc spindle tool holder not rotating but the spindle is running.