Got another machine coming in so dropping the price a bit down to $44.9k. Save a lot of time and money compared to new. I wish we could keep it but our shop ended up doing just smaller aluminum...
Type: Posts; User: Saguaro
Got another machine coming in so dropping the price a bit down to $44.9k. Save a lot of time and money compared to new. I wish we could keep it but our shop ended up doing just smaller aluminum...
Added more pics to the link and took videos of it cutting, changing tools, and going full range of axes (message me for those).
Options include:
- 10 HP, 24k RPM spindle
- 10 tool ATC
- 15 HP VTLF Becker vac pump
- Phenolic T-slot 5'x10' table
- Wireless controller pendant
- Pop-up pins
- Dust Dock + Dust Boot
-...
Yeah I think maybe the other contactor is what the e-stop status is set to. Because the controller had no clue the e-stop was not functioning correctly. We could move the gantry head around just fine...
Maybe this will help someone in the future. We bought an Accurpress 7606 that was originally wired for 208V, then rewired to 480V, then we bought it and changed it back to 208V. First verify that...
For anyone that may have this problem in the future. After troubleshooting with Shopsabre, we found the problem to be a bad e-stop contactor. There's 2 contactors that the e-stop triggers. For us,...
It did end up being a motor rotation problem. We actually did try switching directions early on, but in combination with the motor not being primed (after blowing instead of sucking) and the fluid...
For anyone that may have this problem in the future. After troubleshooting with Shopsabre, we found the problem to be a bad e-stop contactor. There's 2 contactors that the e-stop triggers. For us,...
We just got an Accurpress 7606. Was working up to the day it got shipped to us. Now we can't get the head to actuate whatsoever. Seller shipped it in the closed position (hydraulics at max...
I tried doing a tool change through WinCNC and the servos all did their job, spindle just didn't release the tool. It seems to not be reacting to anything. The VFD is getting correct power, just...
VFD and WinCNC are talking. If I adjust RPM, it will reflect on the VFD with a frequency change. For some reason the VFD is simply not sending power to the spindle.
By any chance, can you share your fix? Same problem on same machine for me.
Howdy, I've been trying to get a used IS-510 I got to work and keep hitting snag after snag. Newest one after getting it homed and a tool in the spindle, spindle won't spin. I went clicked the...
Howdy, I've been trying to get a used IS-510 I got to work and keep hitting snag after snag. Newest one after getting it homed and a tool in the spindle, spindle won't spin. I went clicked the...
T-slots, tool touch pad, and within the last 5 years preferred. Thanks