Well, I went ahead and tried connecting those two wires to the circuit board (both possible ways) and that did not fix the issue. :(
So, this leads me to thinking either bad cables (not likely I...
Type: Posts; User: bjdawg
Well, I went ahead and tried connecting those two wires to the circuit board (both possible ways) and that did not fix the issue. :(
So, this leads me to thinking either bad cables (not likely I...
First of all, I will try to make this as short as possible. I have a Plasmaroute cnc table (unfortunately they are out of business; found an obituary for the guy that owned/ran the business, so I'm...
You said that the oil worked well, but smelled; what about using some never-seize?
I tried ML Campbell's magnalac in a satin finish and I also tried flat and semi-gloss of another brand; but I'm not sure what the brand was.
I have tried laquer, sanding sealer, wood conditioner, and a couple other things I can't remember at the moment; some were worse than others but they all darkened it significantly. I believe the...
I am making some end tables (see attached photos) and my original intention was to fill them with resin. However whenever I put any kind of finish on it darkens to the point where you can hardly make...
I would think they're fairly dry; but don't have an actual moisture meter. I've had those two pieces for about a year and half maybe a little more before I decided what I was going to do with them.
I recently decided to "play" with my dad's CNC machine and learn how to use it. Decided I was going to make some end tables out of a couple pieces of oak I kept when I cut down a couple trees in my...