radial engraving i have a macro if needed
Type: Posts; User: nickydoyl
radial engraving i have a macro if needed
(CALL OENGR TXTH=5 DIA=84.82 ZPOS=-25 CPOS=0 TETH=2 SRPM=8000 FEDX=50 DEPX=0.3 FEPT=.005 HEAD=1 perc=1.0)
OENGR
(V1 IS THE ID NUMBER)
(V2 IS THE COUNTER)
(V3 IS THE HEAD TO ENGRAVE ON)
V3=HEAD...
i have an engraving cycle where we add the engraving number (8 digits max) to the common variable 1 and add the incremental number to common variable 2 then call a .ssb file giving the diameter and...
Guys I'm having dificulty loading a .ssb program using the floppy drive on this OSP7000L controler what do you need to do differently to load it?
we have had 3 boards on our e32 taken out and repaired no problems
i put a back champer on the bar before it gets taken out like so
M8M5
N82-11
/G0X160.0T1100
/G0X[#814+0.946] (bar Dia prameter)
/T11
/Z[#818-0.71](part lenght parameter (lenght +parting...
MAy be im reading your question wrong but when my $2 is not doing any thing i leave it like this
$2
G50X160.0Z0.0
G730W1
G750
G730W1
G999
N999
M2