I have had success. I will do a picture filled post with the "hidden" screws and what you do and don't have to do
Thanks,
Gary
Type: Posts; User: Kool Parts
I have had success. I will do a picture filled post with the "hidden" screws and what you do and don't have to do
Thanks,
Gary
Thanks for this, I have almost all of the sheetmetal around the lower piece and still no go.
I will be on it later today there has to be one more screw still not found
Shut the valve to the coolant off so I could wash the table down, and coolant started leaking out of the cover around the spindle..and around back where the black plastic sheath covers the coolant...
Settting 23, yes. Could not even see them without it.
When I try to delete or modify that program I get a 251 Program integrity alarm.
I did make up a 9000 program and it allows me to load it....
Wont let me edit or delete or replace by reloading..When I save it and take it to a computer the ! does not show up
Not sure what the next move would be
Gary
I bought 2 mills new that had that system. The 0E did not have problems as I remember but the VF4 had 3-4 units go bad.
To the point that I bought a small nitrogen bottle and fabbed up a braided...
Good call! I think there is one with messed up number (see pic)
How to edit that, rather than delete?
Gary
My 2012 FM2 got the program corrupted message. I copied and then deleted all of the programs but on start up the message is still there.
It has done this before with a different message (cant...
I cant remember the travels but I started with a '98 VF0E. Same iron same everything. You will be fine.
These have the air counter weight system which they stopped making I am not sure of the fix...
There wont be major changes..going backward. No major company ever does that, even if it cures problems.
I am on the brink of multiple machine buying spree (God help me) and for the first time it...
I do not have the new control yet so not sure if this is different
Settings page
type 7
arrow down
That should find setting seven. If not, then that should be something that would be in the...
I would do a complete backup of everything (from the usb)
If it is not too late. Then install a new battery or that new dual batt kit from haas. (don't shut it off) 3v is not enough
The only...
Most would cringe at the added cycle time, but when tapping multiple holes I always start 1 inch up. That give the coolant time to blast the chips from the hole before.
If you are peck tapping then...
To your question, does the old hass control ( I assume you still have it) output the dxf, and if so you might beable to get them that way.??
Gary
This is why I never do anything but simple edits...
I would think its in the programing manual that you can download but a call to haas would sort it out in a few min.
But the only thing that I want to do at the machine is screw the vice in and out...
That seems like a lot of $$ for memory, but I don't know all that goes into the upgrade. I have not drip fed in many years but someone will come along here with good info.
Also do a search here, you...
One more simple check is you said "and even tried calling it 2 different models"
I had this one get me once, when you look at the page of available models there is a "next page" or drop down..don't...
Power wise I have run the load meter in the red for many hours at a time, with just a 60amp breaker.
I have never cared about the hp ratings as there is always a way for company's to cheat that...
The truck just shows up at the street, up to you to get it in. Your dealer would be able to give you contact of riggers in your area.
Always seems like too much money but unless you have the...
So $2500 smackers? Sounds like you need a couple of chunks of 12L14 and you keep that money in house.
Gary
You are on the right path, a great machine and a good option list. :wave:
Dallas J..no chip auger..dude step up :stickpoke The chip augers suck but none would be hard to take for sure.
Give one...
Very nice, you will want some kind of mist control with the small square footage. I use these as they work great, cheap, and 120V plug
MistAway - Simple - Reliable - Affordable
Good luck on the...
Very cool. I demoed one in my shop a while back they are a very neat unit.
Gary
I did the jumper battery about 2+ish years ago when the original failed. ( no warning no alarm) Luckily I lost nothing as I had just done a regular backup.
But I left the old battery in as I was...
Yep confirmed no internal meter that you can access.
Gary
Just got the low battery alarm so I installed the dual battery kit from Haas that I got a while ago. Is there a setting or parameter that would show the voltage?
I would love to see what the...
1600 yea kiss my arse. I went with one of these 5" GATOR Lathe Chuck 3 Jaw Front Mount NEW 2 pc. Reversible Jaws | eBay
If you are like me an hate ebay just call them direct. Very knowable good...
Post up your code and I will try to help. Lots of ways to skin this cat but lets do it the easy way first.
Gary
So what was the outcome of this problem? Please report back that way we all learn.
That issue would drive me insane.
Gary
Ok, been using Haas since '98..WTF is a Regen stack? I could google it, but wont.
Both machines at the same time, that has to be incoming power. But they had a tattle tale on there and no power...