enroute is signmaker software for the most part. It can be 'tricked' into performing other operations but..... leaves much to be desired. Ive been using it since 2007. I cannot say that I am...
Type: Posts; User: SignWave
enroute is signmaker software for the most part. It can be 'tricked' into performing other operations but..... leaves much to be desired. Ive been using it since 2007. I cannot say that I am...
it is my understanding that CO2 cannot be used to cut aluminum. mild and stainless steel... yes. aluminum...no. if you want to cut num num..you'll need a YAG laser.
also 150W single will barely...
delete... see below
your images are far too small to be useful. Please increase size.
I will hazard a guess that black/red will match up blue/red . I cannot see well enough to be of any good help.
rule of thumb: ...
I also have a similar issue. Tube is a 90W SPT. It has very low hours on it. The tube lases and excites but it puts out very little power. This tube has a red dot diode laser built in. It is aligned...
Geez... I had something similar happen with a 708. I could not figure out what was happening or why. Im sorry I cannot help.
On my rig, I installed a 708C+. The one axis ran the length of the...
anyone? anyone? Surely I am not the only person here who is running a 708C+
Just need to know how your controller behaved when you energized it for the first time....
Cheers!
This sort of makes sense. Something is loose someplace... OR there is an internal anomaly in the controller. When the head changes direction, is there any sort of rattle or mechanical/electrical...
yeah... its not really up to me to create the files for you to test on your machine.. this will only take you a few minutes to create. I am not able to load a vector to this website. Im not familiar...
Try cutting a square that has been cut into 4 triangles and post those results. cut one at 90 degrees then another that has been turned 45 degrees as a whole. leave about 5 mm between sections. and...
Hi Millie,
Here's another test you can try... Probly take you an hour or so, over all, to get a possible result.
Generate a rectangle/square shape in your software. Try to make it at least 90 %...
Hello fellow 708c plus users...
Just a quick question to start...
When you installed your DSP, and turned it on, did both your X and Y axiz move significantly? Or did you have one move farther...
Hi Patrick,
A Month late.. Dunno where youre at. I have a 708Cplus that is causing me some grief. I'd like to suggest that you go into your manufacturer menu....
Hold down the "stop" button and...
Brilliant comment. Thank you. I will take it into consideration.
It is troubling that there are people out there that seem to think that selling junk is the only way to make a living. I however...
never mind making a good package..... make sure the device actually works.. DO NOT repackage a defective unit and then send that to you customer..... Seriously.. is there profit in sending out...
Thank you for you replies. I am well aware of all the pro's and con's associated to this purchase and function of a 150w tube. I have tried repeatedly with both Sinjoe and Reci but niether company...
Ive considered Light object, but they are slicing another month off the warranty for a reci tube. How does that work? In my mind.... a warranty to a client should be for the full term... And living...
I have a little story about a company I dealt with. This company has cost me a great deal of money. I do not feel that they are an honorable company to deal with. What you see below is a power...
is it possible that the polarity is reversed?
the hissing noise you hear is high voltage leaking to ground. there should be no such noise. Check your "red Line" make sure it is routed away from the ground line as a start. If the noise is coming...
no Emily.
This is RECI tube.it is supposed to be new and never used. I bought it a year ago. I never energized it and now when I try.it does not lase. So i bought a junk tube. I dont know what...
I have these photos. I can take better if needed....
356148356150
Thank you Emily.
Can you show side view image of anode and cathode?
If a tube is brand new and not used is there discoloration on cathode? yello color from heated metal? Thank you for sharing
Sounds like you might actually need to do an alignment. I had an issue similar. aligning the mirrors did an amazing job. The cuts would "fuzz out" the farther away from the source that the cutting...
that is unfortunate news. I email Reci and have no reply. I think I will find another company to deal with.
This whole ordeal has been a terrible time.
I have learned something from you Eric. I...
Thank you again Eric,
Is the gas under pressure in the tube? how many torr if so?
If this tube will not lase because of gas molecule deposit, Can I do anything to change this?
I have...
I purchased the tube in Jan 2015.. It is brand new never used. I may have waited too long and now I have no chance for replacement,,, I miss by two months...
IF this tube looses its gas in a year,...
Thank you,
I am still unsuccessful trying to fire tube. I pressed the test fire button on the controller, I saw light inside anode end but nothing else. Highvoltage static charge sits on outside...
thank you Eric,
You are very helpful. I am grateful.
As far as I know this tube is supposed to be brand new never used.
a milliammeter..... bad spelling this: ...
Oh no... can a tube lose gas? how does that happen? This tube sat for a year.... My last tube was in use for 4 years no gas loss or power loss....
I will try to fire again in a day or so. I have...