Search:

i normally have this sort of work carried out by laser engraving, i could let you have the details of the firm i use but they are in the UK. suggest you google
Laser engraving in your local area....

Hi i have a interact one mark 2 of 1994 vintage with a 2500B controller and have a problen when either 3D milling or pocketing when the cutter starts to squeal when for instance if pocketing milling...

i use an elastic wheel and feed in by hand, by far the quickest way i have found.

i aint used one for a few years now as i have a wire eroder and clean up any damaged sprues using that.
But when we used to use them we had a rougher and a finisher for each size.
we would run the...

i had the same problem with my machine and was told to swop the U axis card for the V in the side of the machine and see if the fault changes axis.
If it does the card is at fault.
If not swith the...

have just sent you an email with boss 5 pages attached.
regards
mark

right i have found 2 manuals. 1 is for the ezcam 2d version 6 and includes the utilitiys software instructions and includes cable wiring etc and the different instructions for the different...

the transfer side of ez-cam is called ez-utilitys, i cut my teeth on version 6 which we brought back in 1994 from bridgeport with a new interact machine.
from memory it ran under windows 3.11.
i...

Hi i have a baron max KE430 ZNC and have it serviced by Terry Kilby who used to sell baron max sparks.
I am sure he will probably be able to help you or know who has a similar machine.
I have his...

turn on machine
wait for it to boot up and make sure that all emergency stops are released.
press white button then the green button and wait whilst it references the z axis, then press the green...

Hi no you dont need to remove the line numbers, i regularly drip feed large programs well in excess of 9999 line to my tnc2500 controller using tnc remo and have never had a problem doing so....

Hi can somebody tell me how i go about backing up my machine parameters to my pc.
I have a interact 1 mk 2 with a heidenhain tnc2500 controller and run tnc remo software.
i wish to back them up as...

bye

it may be obvious but you have checked that the feed rate override knob has not been turned right down as i have fallen in to this trap on my interact 1 mk 2 with TNC2500 FITTED. make sure the knob...

Hi i drip feed to my TNC2500 using remo all the time.
to drip feed just go into the program run mode rather than the program editing mode and then press the external mode button press enter a couple...

has anyone fitted new spindle bearings to an interact mk 2?
the machine is of 1994 vintage and fitted with the TNC2500 controller.
If so how long did it take and did you encounter any problems?

i have been using ezcam for 15 years now producing 3d plastic injection mould tools.
i started whey back with version 7 and now run version 16 pro. i also run ez-edm to program my wire eroder.
i...

i had same thing a couple of years back and mine turned out to be a faulty mentor drive.
i sent mine away for repair to a company called electro-aid who used to do the repairs for bridgeport in the...

i was involved with the manufacture of most of the plastic parts for the SA80 standard issue rifle to the nato forces and got to visit the factory at nottingham and see the whole process.
they...

Hi i too run and interact 1 mk 2 with a tnc2500 controller and i use tnc remo software down loaded from the heidenhain website and have done so for years. i create my programmes using ezcam currently...

Hi i purchase 2 turret mills from jih fong machines about 7 years back and they have been used ever since in a mould making enviroment and have proved very reliable.
i am based in the UK and at the...

Hi guys i think i got away light (well as far as the interact goes anyway) upon close inspection one of the driver boards was not lite so i sent it way and got it back today from repair and popped it...

Hi my machine was working lovely till i have a visit yesterday from a pair of so called electricians who had come to run new cabeling for a new moulding machine that the company has brought.
any way...

HI i was involved a few years back in the SA80 rifle project that was and i believe still is atandard issue weapon to the uk armed forces.
the handle on that weapon was moulded in glass filled...

here in the UK most mouldmakers are now getting cores like this built up by laserwelding with the filler material the same as the core material and then grinding it back to shut off.

we usually couple the ejection as we have found that components fall free better with this system.
as previously stated if the tool has side action cams above ejector pins then to prevent damage you...

i have a interact 1 mk2 fitted with the tnc 2500 and as you say it boots up and comes up with power interuptted
you then need to press ce and press the start button for it to travers to reference...