Search:

The error indicates "haspdriver not installed" The paperwork i have indicates that to fix this problem run "hinstall-i" from the mcam9 common directory. When I look at that directory it has...

All,
I bought an Intelitek prolight lathe with all boxes, cables, computer etc. from a college. It operates fine but for some reason won't start the spindle with speed control knob in the...

Hello all,
My recently aquired SpectraLight/Intelitek lathe spindle motor won't start. I heard a relay (?) click but the motor does not start. I think the door safety switch is ok but need to...

not familiar with Mach 3? upon further investigating, seems even intelitek program won't function. spindle does not start with the switch in the "computer" position. then none of the G32 threading...

Spindle won't start with switch in "computer" position? I hear a snap like a relay activates but no joy? Spindle does start with same switch in min-max rpm position?
Intelitek prolight 3000...

thanks for the reply. i will search my manuals and get back to you.

i tried this a few months ago and not sure about the moves on screen? i'll try it again and let you know. what do you mean by "Setting in mach?" i do have post in Mastercam regarding this issue....

I didn't think that i indicated Mastercam was at fault, and am not saying that now. only that i have not been able to make things work and am looking for help. I thought that if i used the...

Not able to cut threads on Intelitek ProLight turning center? Program posts but does not work properly. Spindle speed isn't correct and probable other problems that i haven't discovered yet? ...

Seems I can't cut threads. Machine does not like Mastercam canned program? I am able to post the thread program but lathe does not follow.
Any suggestions/help would be appreciated.
Thanks in...

The controllers are limited to 2000 lines of code. Why would this be and is there any upgrade or way around this issue? Seems many posts exceed that limit.
Thanks in advance.
Mike

I was able to create and cut a contour of it but the finish wasn't what I anticipated? I used a ball end cutter but ended up with ridges between cuts. What am I not doing correct? Am using 9.1...

Dear Mr Kent,
Thanks much, seems your answering all my posts. I really do appreciate your help. So Cimco is another software? My machines are older and I have DOS controllers. I have the mill...

If I want to use a endmill the same size as the cooling fin valleys. Is it possible to draw a line and program the chain to follow it on center? It appears that its either left or right of the...

All,
I can't seem to send my post directly to my machine? I have older Light Machines, it uses DOS program runs through an (ASI card?). I contacted supoort at Intelitek but haven't heard from them. ...

All,
Version 9. I can't seem to send my post directly to my machine? I have older Light Machines, it uses DOS program runs through an (ASI card?). I contacted supoort at Intelitek but haven't...

Thanks guys, I haven't been able to try any of these but will soon. I imagine I'll have more questions once I try these. Too bad work gets in the way of hobbies.
Mike

I had a problem with my colors not showing correctly. (V9) I changed setting and it is better but I don't know if it is still correct? Is this my video card? What is the correct computer...

Thanks much, this is helpful.
Drawing: Hadn't found that <F9> datum lines yet. Those may clear up some questions I have. I can understand Y on the side view is z at the top.

I don't have...

A basement hermit hobby newbie MasterCamer 9.1. Needs recommendations of best approach to drawing and machining cooling fins. My part is flat rectangle needs fins on four sides. I have drawn the...

Thanks, I will try that. You have been very helpful.
Thanks again.
Mike

I have fumbled thru MC 9.1 enough to send a simple program to the mill. It didn't like the code; wasn't happy with the WCS and a couple of G codes. The machine is a Light Machines TMC 1000. I...

First of all I am a newbie. Recently aquired older Light Machines TMC 1000 mill and ProLight turning center with computers running on Windows 98 and MasterCam 8.1 loaded.

Problem 1: ...

Can a new one be purchased? I'm afraid I know that answer but any idea of cost?

A newbie here. I recently purchased a cnc mill and lathe from a college. The package included MasterCam V8.1. When I tried to open MasterCam a window popped up and said "No HASP Found". The...