For wire I'm pretty sure the majority of people are using the machine comp. It makes more sense on a mill to let the computer do it as you have all different size tools. Not so on the wire machine. I...
Type: Posts; User: wdevine
For wire I'm pretty sure the majority of people are using the machine comp. It makes more sense on a mill to let the computer do it as you have all different size tools. Not so on the wire machine. I...
I may be able to help you out, I will have to check at work. Where are you located?
This happens on our Fanucs occasionally, in our case it's definitely because of lack of grease. Apply the correct grease the correct way and you should be fine.
Don't really need to worry about...
Give methods machine tools a call, they're the main distributor of Fanuc EDM machines and I've always found their service people to be very helpful. I've never asked for a part that they couldn't...
Ask, and ye shall receive. PDF should be attached.
I'm assuming you figured this out, but I have a printout I got from Methods Machine that gives step by step directions on how to do the reference return. If this would help anyone out I can scan them...
I know this is an old post, but we have 3 seats of Esprit here, and they're all really, really old. Like version 30, which I think is from somewhere around 1998, and I run them on computers using...
I've had this happen when the conductivity of the water is way off, or if my ground or power cables are starting to go bad.
Another possibly stupid question, but (on a couple of my Fanucs, at least) are the 4 conditions on? The old Fanucs won't turn them on automatically without an M86 in the program, or you manually turn...