Search:

I've got 4 J2S-40A drives and have the manual. Where exactly is the error? Which pin is step and which one is direction?

Just curious if anybody has any schematics or pinouts for this particular servo driver. It's a Sanyo-Denki PY0A030E0YXXPH1. I have the PY0 manual but this was obviously a specially made item. I...

I've had a couple people ask for this software, so I've decided to attach it here.

Charles

Well, Sanyo-Denki was nice enough to email me the software so I'm in luck there. Now I just have to figure out what cable the computer uses to interface the drives, I haven't received them yet but...

Well, thankfully after contacting Sanyo Denki, they provided me with the software!

Does anybody have this software? I know these drives are a little older but I need a copy of it.

Thanks, Charles

The problem is, I don't think I can put them in step/dir mode without the software. The granite devices look nice, but this appears to be a 200 volt servo. As for driving the gantry, i'm going to...

Looks like I'll probably be stripping the servos and drives anyhow, can't locate the software online to tune them. good news is that the Sanyo P5 servos say the have standard nema mounts.

I bought 3 of these looking for a somewhat bolt together cnc router that will have a 2.2kw chinese spindle with a k2cnc z axis.
...

I want to order a machine in the 24x36 range with an option for a cheap chinese spindle. I have read through about 40 pages of posts and would just like a quick rundown on a price shipped completely...

And I do believe that they are good, hence my buying them! Thanks for the timely solution.

I would like to make a bit of an apology. John contacted me and is shipping out the connectors. Good guy, great service, and wants to make things right.

Thanks John

Those drives are close, but no cigar. I greatly appreciate your help though.

For those of you thinking of ordering this driver, you might want to reconsider. The pictures of this driver on the website are not the pictures of the driver you will receive. This driver comes...

I have a harbor freight 33686 mill that I am in the process of converting. I have a 3 axis hobby cnc driver and 3 steppers from kelinginc.net. The steppers are rated at 304 oz/in unipolar, 425...

Thanks for the replies. Yes they are big. Just under 3/4hp. I want to set it up good the first time, don't want to mess with it later. Was trying to decide which one to build first, the cnc...

Now the question is do I need to reduce the gearing on the servos?

I'm CNC'ing this mill http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=33686 with some electrocraft E712 motors.

Reliance Electric DC Brushed Servo Motors, Model E712
37.51...

I've got 3 Powermax II M22NRXB-LNN-NS-00 Steppers
2.3 Amp Bipolar 65V 1500 RPM

I have a harbor freight mill I am converting, not a mini mill but the 33686...