Set your machine up with FTP. Connect machine to your router via ethernet cable and turn on FTP in network settings and use FileZilla to put files directly on machine from any computer on the...
Type: Posts; User: loober
Set your machine up with FTP. Connect machine to your router via ethernet cable and turn on FTP in network settings and use FileZilla to put files directly on machine from any computer on the...
If you send a profile cut at around 1" x 24" in both x and y direction. Do they both come back as 1"x24" ? You can just cut into the spoil board instead of cutting up real material and mark the...
I got it figured out. It was param 61 and 65 for me. Initial value of gain was 2500 but it was overshooting my cuts and I double checked gcode from multiple different posts from different programs. I...
Your machine might not be rigid enough to move at those speeds . You can slow down your spindle to match your cut speed to get the exact same quality as you get at 100ipm. You might also have a...
Hello, I have a Syntec EZ4 controller and I have an issue with the Y axis overshooting the cuts. I can't find any information as to how I can adjust the overshooting/undershooting. X and Z have no...
Find a local sign shop , not a print shop, sign shop. Ask if they would sell you blanks and they would generally be cheaper than ordering from anywhere. Ripping down 4x8 on the tablesaw takes like a...
How much did you end up paying for the machine?