Search:

So I'm reviving my dinosaur (1983 Kitamura Mycenter 3 with Fanuc 6M)with a shot of adrenaline (Mastercam 2018)! Are there any post processors in the installed library to use? If not does anyone...

Hi all. I have a 1983 Kitamura Mycenter 3, Fanuc 6M controller with carousel ATC. I've lost the tool change macro. Anyone on here with a copy they would be willing to share?

Hi all. I have a 1983 Kitamura Mycenter 3, Fanuc 6M controller with carousel ATC. I've lost the tool change macro. Anyone on here with a copy they would be willing to share?

Hi all. I have a 1983 Kitamura Mycenter 3/Fanuc 6M controller with carousel ATC. I've lost the tool change macro. Anyone on here with a copy they would be willing to share?

Hi all. I have a 1983 Kitamura Mycenter 3 with carousel ATC. I've lost the tool change macro. Anyone on here with a copy they would be willing to share?

Hopefully my final issue! I have a 1983 Kitamura Mycenter 3 w/Fanuc 6M controller. Side mount carousel ATC is what I'm troubleshooting now. M06 command just hangs machine like its waiting for a...

Thank you Superman! I'm going to use your example to help me troubleshoot the ATC. At least I'll know it's not another one of my program failures :)

Heavy Metal thank you so much. That simple to you correction fixed it right up Program cycles all the way to end. Now all I should have left is troubleshooting the tool changer carousel and I...

single block still will not continue past Mo3 unless I press reset first.

Good morning gentlemen and thanks for the response. I'm sure you'll get a chuckle out of my feeble attemp at g-code programming but here is what I did

G90 G17 G28 X0 Y0 Z0
G54
G01 X2.00 Y2.00...

I have a 1983 Kitamura mycenter 3 with Fanuc 6m controller. I can issue a spindle speed and m03 or m04 command in MDI and machine responds. RPM gage reads whatever S**** I entered. However when I...