Search:

Thank you for your responses.

I guess the gape pins are there to push the stock against on the X and Y axis? in that case I need something that pushed against those pins.
Lets say that I have the...

Hi All!

Firstly I love how much information can be found here and how helpful the members are.

I am new to the MIlling world and would like to ask you guys for your ideas or best practises on a...

I have an update on my issue.
After removing the X axis stepper motor, rotating it 90 degrees so the screws are not in the same place anymore and reconnecting the wires to it, the CNC seems to have...

UPDATE

I have taken off the X axis stepper motor. It moved freely as far as I can tell.
What I have noticed is that when the machine is moving on the Y axis, the X axis stepper motor shakes very...

I thought about swapping the x axis stepper motor with the y to see if it happens. that would rule out the motor itself.

Thank you for your reply.
I have created a small test process which a simple 25mm square with a smaller square inside of it and the code has 3 passes, 1mm depth increase with each pass. I will test...

Hi All!

I am new to this site but I have already learned a lot about CNC milling by looking around.
I am just starting off with CNC machining so apologies in advance if I use the wrong...