502,850 active members
6,712 visitors online
Register for free
Login

Search:

Type: Posts; User: Lomach

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Replies
    7
    Views
    1,739

    Re: RENISHAW CYCLONE SOFTWARE TRACECUT24a

    Hi, I have the renishaw Tracecut discs and dongle if anyone is interested.420470
  2. Replies
    4
    Views
    80

    Hi. It’s a Fanuc Robocut Alpha 0-C with a 16-WC...

    Hi. It’s a Fanuc Robocut Alpha 0-C with a 16-WC control. It’s new to me and was purchased knowing it had this fault.

    Thanks
  3. Replies
    4
    Views
    80

    Re: Alarm 2 on A06B 6079 H201 servo drive

    Hi Tristarcnc. Thanks for the reply. I have checked the capacitors and replaced the 621 opto, c4151 transistor but had no affect. There is a 15v regulator which I haven’t checked yet. As it’s the 5v...
  4. Replies
    4
    Views
    80

    Alarm 2 on A06B 6079 H201 servo drive

    Hi, I have got a machine with an alarm number 2 on the A06B 6079 H201 servo drive which does not appear if I turn the machine on without connectors JX1A and JX1B connected. If I connect either one...
  5. Replies
    2
    Views
    202

    Re: Tornado 100 Turret Overheat

    Hi, Thanks for your help. I have checked the voltage through the Overheat Sensor and when disconnected it is 21.6volts. Is this classed as low? I am unable to check the solenoid voltage yet as my...
  6. Replies
    2
    Views
    202

    Tornado 100 Turret Overheat

    Hi

    I have a tornado 100 which keeps coming up with a Turret Overheat alarm. It used to just happen when I first turned on the machine and I had to turn it off and on again to clear the alarm...
  7. Replies
    0
    Views
    38

    Astec CDH fast hole drill fault

    Hi

    Does anyone have any schematics or fault finding info for an Astec CDH-3A fast hole drill. The machine powers up and homes fine but alarms out when starting the drilling cycle. Any...
  8. Replies
    17
    Views
    911

    Re: Fanuc G84 rigid tapping code

    You could try putting a M19 spindle orient before the M29 Line. It might not help but I use it every time.

    N840 G00 X3.1819 Y-3.1819
    N845 G43 Z0.2 H05
    N846 M19
    N450 M29 S400
    N855 G84 X3.1819...
  9. Replies
    3
    Views
    297

    Re: Fanuc 6m Manual reference return

    Hi Heavy_Metal

    Thanks for the reply. The machine does not have a machine lock button/key so I cant try that.

    Regards
  10. Replies
    3
    Views
    297

    Fanuc 6m Manual reference return

    Hi, Can anyone help me try to home an axis without actually moving it. I have machine with a fanuc 6mb control and there is an issue with one of the axis motors but i want to carry on using it...
  11. Replies
    3
    Views
    304

    Re: Fanuc Tape Cut Display Died

    Hi Agering, Your private message inbox is full
  12. Replies
    3
    Views
    304

    Re: Fanuc Tape Cut Display Died

    Hi Agering, Thanks for your reply. I have looked at the monitor and the power supply a20b 1000 047 is low on voltage (3.5v) so that could be the problem. I have sent you a PM with my email address...
  13. Replies
    3
    Views
    304

    Fanuc Tape Cut Display Died

    Hi, I have a Fanuc Tape cut with a 6mb control which has been running fine but it has suddenly stopped and the monitor is flickering with no readable display. I have restarted the machine but no...
  14. Replies
    3
    Views
    579

    Re: Any bridgeport cnc machines for sale

    Ive got 2002 ezplus (eztrak) 2 axis machine. Its in very good condition and hardly used in the last 4 years.
  15. Replies
    4
    Views
    1,128

    Re: Fanuc robodrill alpha T10A programming

    jesse_g - Oh yeah forgot to write you need to put PWE back to 0 but you figured it out that is the main thing. They are great machines.

    Regards
  16. Replies
    4
    Views
    1,128

    Re: Fanuc robodrill alpha T10A programming

    To get out of the toolchange area try the following.

    Set PWE -1 (parameter write enable)

    System (on keyboard) then press page down
    PMC on soft key
    PMCPRM on soft key
    KEEPRL
    Cursor to K10...
  17. Replies
    2
    Views
    667

    Re: Hurco Autobend 7 Control Relays

    Hi Brock_r,

    Thank you so much for this. The machine has been sat here for a while now but I will order the relays today.
  18. Replies
    2
    Views
    667

    Hurco Autobend 7 Control Relays

    Hi

    Can anyone tell me what relays go into the 415-0228-905 board on a Hurco Autobend 7 Control. The machine came from an auction with no relays in and cant seem to find a reference other than...
  19. Re: Submicron Dial Indicator (was: DIY Diamond Turner)?

    If you search for LVDT it should give you what you are looking for. I personally like Tesa and have a TT10 which goes down to 0.1 microns. I have an older version which I would sell if you are...
  20. Replies
    1
    Views
    815

    Re: Matsuura, Yasnac j100/j300 parameter help

    I was looking for the exact same thing a few months back so if you find this out can you share it please. I went through the parameter manual twice and couldn't see it and there doesn't seem to be...
  21. Replies
    8
    Views
    1,032

    Re: how to remove aluminum chip weld

    I have used Caustic soda before. It is available from most diy or hardware stores as drain cleaner. Just add about 100g to a litre of water and let the cutter soak for half an hour or so. The mix...
  22. Replies
    3
    Views
    2,303

    Re: Perimeter Probe Routines

    Hi gishere

    Below is a program I wrote for doing exactly what you want. All you do is manually jog the probe to the centre of the work and press cycle start. You can change the feed rate,...
  23. Replies
    30
    Views
    6,371

    Re: Strange Rigid tapping Problem . Please help

    Hi

    Have you tried putting m19 before the cycle. I had to do this on an O-Mate control I used to run.

    EG

    M19
    M29 S500
    G84 etc
  24. Replies
    12
    Views
    4,213

    Re: Retrofit cincinatti arrow 500

    Hi Enhanced

    Mine was very similar to Petes conversion but I did mine two years ago. I bought the machine with a blown y axis servo drive and stripped it right down with the intentions of...
  25. Replies
    0
    Views
    304

    Help with Punch Macro

    Hi All

    I am trying to make a macro to operate a punch but I am struggling to get it to work. Can someone point me in the right direction. The punch has two sensors for top and bottom of the...
Results 1 to 25 of 65
Page 1 of 3 1 2 3