I picked up a 97 daewoo puma 8s lathe It came with no tools/holders I’m new to cnc lathe machining and picked up tooling insert type but don’t know what I need as far as tool holder for drilling,...
Type: Posts; User: Ctw fab
I picked up a 97 daewoo puma 8s lathe It came with no tools/holders I’m new to cnc lathe machining and picked up tooling insert type but don’t know what I need as far as tool holder for drilling,...
My laptop sdnc is set at 9600 so that’s what I set it at but I will double check that parameter
Yes I’m using same cable as well as the cable that came with the device, I have baud rate set at 9600 but do you think I need to set it at 4800?
I bought a micro dnc from eBay for my 1989 kiwa excell colt 510 that has a Fanuc om control....I use sdnc to transfer my programs from my laptop with a rs232 but when I use the dnc it will not...
I have a kiwa excell colt 510 with a Fanuc om controller and my offset page only goes to 1-32 and having problems when I program with mastercam using cutter comp my machine Biggs out and does not...
I recently got a kiwa excel 510 machine that isn't not currently working...the switch in the back powers up but the control box doesn't light up nor does the screen come on anyone have any ideas??? I...
Hey guys, I've been running my plasmacam dhc model (not the dhc2) this thing used to run awesome but not its in reliable the machine is constantly glitching while running parts. I've been cutting...
I have the 3.11 version software already, the parts that I cut I've been cutting for years and I've been using a plasm cam machine for years as well so I know 100%it is not the drawings. I've checked...
I tried calling them and actually talked to technical support and explained my issues with the machine glitching and they did not give me my helpful tips or suggestions and pretty much rushed to get...
PlasmaMac thanks for the helpful tips it helped me out a lot, I'm having other issues with the machine glitching and making the cut path go off course and causes it to cut bad parts and is quite...
So I got my plasmacam up and running but can't seem to get the dhc to work properly does anyone have any experience with setting up the digital height control I have the dhc1 any help would be...
I just picked up a used plasmacam DHC model and set it all up but don't know how to wire my plasma cutter to the controller box. Can anyone help me out with a diagram or know how to wire it up?