584,826 active members*
5,227 visitors online*
Register for free
Login

Search:

Type: Posts; User: bhdavis1cnc

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds; generated 45 minute(s) ago.

  1. Replies
    1
    Views
    51

    C76 settings for Probe 2 in UCCNC

    I have one of those inexpensive touch down probes as shown in the first image below. I have it wired to Port 2, Pin 15 on my C76 board. The probe base is wired to Pin 15 and the probe alligator...
  2. Replies
    0
    Views
    172

    Post Processor for Enroute

    Anyone know if there is an Enroute post processor for UCCNC ?

    Thanks,
    BH
  3. Adding a second probe to CNC4PC C76 control

    When I built my CNC4PC control I included one of the C48 touch down probes (an earlier version of the one in the photo). It is mobile probe and I use it to touch off my material top surface location....
  4. Re: Running a print job faster / Speeding Up a 3D print

    I tried outsourcing the 3D printing. They did a lousy job. All were functional but looked awful. It has an internal dome that needs to be laid out carefully without supports.

    As to machining...
  5. Re: Running a print job faster / Speeding Up a 3D print

    Thanks. Glad it was sorted.

    Update: I believe I've resolved the speed issue with the purchase of a Flashforge Adventurer 5M Pro. It runs significantly faster and hotter, plus has a bunch of...
  6. Running a print job faster / Speeding Up a 3D print

    How to speed up a 3D print ?

    I'm 3D printing lots of parts similar in nature to what I'm showing in the three images below. These are hollow on the inside with an approximately 1/4" thick...
  7. Replies
    5
    Views
    512

    Re: CNC4PC C76 Relay #1 & Relay #2 glitch

    Arturo,

    Please reply. Are the TWO jumpers for USA or INTL only for Relay 1 and Relay 2 ? Or do they affect some other feature on the UC300ETH as well ?

    Bernie
  8. Replies
    5
    Views
    512

    Re: CNC4PC C76 Relay #1 & Relay #2 glitch

    Arturo,

    I gave it a try and moved the 2nd jumper over to USA. THAT DID THE TRICK. Thank you !!

    Question: is there anything else this change might affect? Something I should keep an eye out...
  9. Replies
    5
    Views
    512

    Re: CNC4PC C76 Relay #1 & Relay #2 glitch

    Arturo,

    There are two jumpers at the USA / Intl location. I have the top one on USA and the bottom one on INTL. Should they both be on USA in order for the 2 relays to work independently on an...
  10. Replies
    5
    Views
    512

    Re: CNC4PC C76 Relay #1 & Relay #2 glitch

    Arturo,

    I've been away but am back home now. I thought I had it on US setting but will double check in the AM. I'll report back.
    Much appreciated.
    Bernie
  11. Replies
    5
    Views
    512

    CNC4PC C76 Relay #1 & Relay #2 glitch

    I have this posted at the end of a related thread but figured I'd post it as a new question here.

    I'm working on getting spindle reverse rotation working on UCCNC with a C76 control board. Up...
  12. Re: Adding reverse using UCCNC and CNC4PC C76 card

    Okay..........headway but I have a problem.

    Entering an M3 activated Relay #1 and the spindle runs CW as it should.

    However entering M4 activates BOTH Relay #1 and Relay #2. This is confirmed...
  13. Re: Adding reverse using UCCNC and CNC4PC C76 card

    Thank you Arturo. As I thought. Much appreciated.
  14. Adding reverse using UCCNC and CNC4PC C76 card

    I posted this on the CNC4PC page here but that gets so little activity I figured I best post it here as well.
    ...
  15. Need to add spindle REVERSE to C76 board with UCCNC

    I need to add a spindle REVERSE feature to my C76 with UCCNC setup.

    I currently have my C76 to VFD wired as follows: RELAY 1 input terminal on the C76 board is going to DCM on the VFD and RELAY...
  16. Replies
    0
    Views
    293

    SYOZ 20 thread pitch

    I'm getting nowhere trying to find this online. Does anyone know the thread pitch of a SYOZ 20 collet nut?

    It looks like it might be somewhere in the 25mm x 1.7 pitch range but I haven't been...
  17. Replies
    5
    Views
    392

    Re: 4kw spindle on 3.75kw VFD

    This is what's behind my spindle change.

    https://rapidchangeatc.com/

    I'm retired so my router is purely for my enjoyment and some fun money from things I make on it. I sold my business in 2016...
  18. Replies
    5
    Views
    392

    Re: 4kw spindle on 3.75kw VFD

    Thank you for the advice.

    40,000 rpm !?!? What are you cutting with it?

    BH

    - - - Updated - - -
  19. Replies
    5
    Views
    392

    4kw spindle on 3.75kw VFD

    I'm considering replacing my old 3.75kw Perske spindle on my 4x8 cnc router with a 4kw spindle. However my Delta VFD is rated at 3.75kw.

    Is that extra .25kw oversize on the new spindle going to be...
  20. Replies
    0
    Views
    230

    Backlash issue ?

    I'm
  21. Replies
    1
    Views
    1,060

    Re: Screen Pan Function

    I'm not at my Enroute computer right now so can only give you a general guide to this.

    Basically Enroute PANS by pressing the left or right mouse button while holding the CTRL or SHIFT key, and...
  22. Replies
    5
    Views
    1,140

    Re: Servo tuning setting location

    Thank you. That is what I was suspecting to be the case. I'll have to look more closely at the axis settings on that backup laptop.

    Much appreciated.

    BH
  23. Replies
    5
    Views
    1,140

    Re: Servo tuning setting location

    [QUOTE=arturod;2525036]Did you get this sorted out?

    Arturo Duncan
    https://cnc4pc.com[/QUOT

    If you read my original post more closely you'll see the problem was resolved before I even posted...
  24. Replies
    5
    Views
    1,140

    Servo tuning setting location

    Had a failure to launch issue with UCCNC the other day that I finally tracked down to network interference from my network switch. Once that was fixed everything was fine.

    However in tracking...
  25. Replies
    1
    Views
    929

    Re: Enroute 5 for sale

    SOLD
  26. Replies
    3
    Views
    5,454

    Re: importing to enroute 5.1

    Just playing in CNCzone forums this evening and stumbled on your post from back in May. Have you sorted this yet?

    If not ask your customer to save the Fusion 360 file as a .STL file. Then you...
  27. Re: EnRoutes currant postprocessor file.. WHERE is it??

    In Fusion select the WINCNC post processor. This will probably work for you.
    BH Davis
  28. Replies
    1
    Views
    929

    Enroute 5 for sale

    Enroute 5 with 3D drawing and tool pathing for sale. USB dongle inlcuded. $1500.00.
  29. Replies
    2
    Views
    2,541

    Enroute 5 for sale

    Enroute 5 with 3D drawing and tool pathing included for sale. USB dongle included. $1500
  30. Replies
    5
    Views
    3,309

    Re: WANTING TO BUY ENROUTE 4 or 5 SOFTWARE

    CAH,

    Did you ever sell that copy of Enroute 5 ?
    BH
Results 1 to 30 of 76
Page 1 of 3 1 2 3