Great..ill start with the lower voltage on a pushbutton....
I may get some electrical cleaner first and trying cleaning the motor in place...I've read the Y motor is in the path of coolant dripping...
Type: Posts; User: NITROCHUCK
Great..ill start with the lower voltage on a pushbutton....
I may get some electrical cleaner first and trying cleaning the motor in place...I've read the Y motor is in the path of coolant dripping...
Ok...so for the graph to have similar structure to the examples in the manual with all the rise and fall features it needs a distinct momentary pulse to get the motor up to full speed with no...
Can I use the rotary pendent on the machine set to the .0001 scale to provide the input signal ??
Yes Rt...
SD1525-10.... great...I believe my tach pin is the same...ill attach the probe there and see if I can get it better tuned....
Besides the lag reading being higher than suggested the...
Yes...I know how to display the lag...I want to watch the Y motor voltage trace on the scope so I can see exactly where the issue is.
The one of my documents shows sample graphs and outlines exactly...
I have a JM325 mill with a delta 20 control.
I have all the associated manuals for the drives, controls, etc including full schematics.
Having trouble getting my Y axis servo lag to spec.
I have...
I'm curious about your last statement..I have some programs that won't drip feed entirely....I'm doing some small text engraving with 1/8" ball Mills....
I'm having trouble running code with my Delta 20...
It loads no problem...code is generated by CamBam and it "looks" Dynapath compliant to me...
No spaces...
1 G command per line...
First line...
Does anyone have a Delta 20 friendly post processor for CamBam ??
I've seen some posts and I'm unclear on how the post gets modified in CB....
Do I need to change individual parameters or can a...
344058
344060
344062
OK .... TREE writes specific directions on tuning and installing the SD1525-10 card into their machine... NOT A SINGLE MENTION OF JUMPER B.....
Saw "jumper B" on...
Luckily i have everything. ...
Drives are Servo Dynamics 1525-10...i have original manuals for those...plus full size tree schematics for wiring from machine to drives and maintenance manual from...
HiJIm,
Yes... I have jog selected and a speed and still no jog....with either cards...except Z works perfect with Y card plugged into all 3 Z connections....
How do I apply the AA battery voltage...
OK Guys....got this thing on the ropes..... I swapped the Y card to the Z and it worked fine.... so I got a good card from Ebay...... installed the card.... no jog on Z or holding power....turn motor...
Can a servo dynamics 1525-10 be replaced by an SD UM 3015-10 or a Baldor UM 3015-100 ??
If so any jumper changes or just plug, tune and play ???
Thanks
Looking at a Journeyman 325 tomorrow... has been sitting idle unpowered for 2 years. Owner wired in yesterday to demo machine for me and found Z axis wouldnt jog.
He called me and cancelled the demo...