Hi, is the OMRON R88D-UA08V AC servo drive suitable for driving a Leadshine's 57BL180D brushless DC servo motor?
I'm asking because some time ago I bought a servo kit including the ACS806 AC servo...
Type: Posts; User: Moriduri
Hi, is the OMRON R88D-UA08V AC servo drive suitable for driving a Leadshine's 57BL180D brushless DC servo motor?
I'm asking because some time ago I bought a servo kit including the ACS806 AC servo...
Hi, have you solved this issue? I have an ACS806 and 57BL180D servo from Leadshine that suffer from a similar problem, the servo works below 530 rpm (the following error is high but it keeps...
Hi, have you solved this issue? I have an ACS806 and 57BL180D servo from Leadshine that suffer from the same problem...
Thanks, Matteo.
UP
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Hello, some time ago I've bought an ACS806 servo drive and a 57BL180D-1000 servo from a chinese seller on Ebay, now I'm desperately trying to tune it using Leadshine's software "ProTuner" without any...
Any ideas on how to implement those funtions in HAL?
Matteo.
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
I can lower the PPR even more if needed (4000 default divided by 255 max), stepgen limits and therefore lower RPM max isn't that big of a problem cause for now i'm just interested in know how to make...
Setting the encoder's PPR to around 400 wouldn't allow the parport to handle it? I'd prefer to avoid extra cards if possible.
Matteo.
Inviato dal mio ASUS_Z00AD utilizzando Tapatalk
Hello, I'm currently retrofitting an old mini lathe to CNC using LinuxCNC as controller.
My goal is to understand how to setup a servo motor as a spindle and how to synchronize it with the Z...
Nice!!! Thank you! ;)
Thanks for the suggestion Randy! :)
Hi, I'm new on this forum, I'm searching a spindle to mill aluminum on my homemade CNC (I'm designing it, actually..).
My budget is very very restricted (50€), so what could I use?
I saw on Ebay...
Hi, I'm Matteo, a Computer Science student from Italy, I'm interested in CNC, mechatronics, electronics, computer science and so on.. :)
See you!