Thanks for the input Jim.
You cant get to that nut till the spindle is out.
I actually just figured it out.
Turns out the bolt for the quill stop (#148) goes into the quill cavity and...
Type: Posts; User: Nat83
Thanks for the input Jim.
You cant get to that nut till the spindle is out.
I actually just figured it out.
Turns out the bolt for the quill stop (#148) goes into the quill cavity and...
Hi folks,
I have an old dynapath delta controlled hurco open bed mill that I have known needs a new set of spindle bearings and a taper grind. Its gotten bad enough ive had to stop in the middle of...
Ok. That worked! Thanks so much guys!
Turned out my post was using the standard “Tx” for tool change so I modified the post to ask for “Hx” and everything is now working well!
One last thing, I...
Thanks guys! I’ll give it a go tonight when I get home!
I’m new to my dynapath delta 40m and cant figure out how to insert a number in my tool crib.
I can select H001 and press the softkey for fixture calibrate and it will store the current z height...