I need the correct wire layout for encoder PY2 -> P5. so I can test the correctness because it shows me the encoder error flashing "8".
The machine on which the equipment was used was WIN NT 2000....
Type: Posts; User: darkoford
I need the correct wire layout for encoder PY2 -> P5. so I can test the correctness because it shows me the encoder error flashing "8".
The machine on which the equipment was used was WIN NT 2000....
Thank you.
Maybe you have a diagram of encoder cable (PY2 - P5 motors)?
Does anyone have a serial cable PIN diagram?
Thank
The error is in the software. You need to contact the BOB dealer to send you the original driver (RnRMotion.dll). So I solved the problem.
The machine was sold so I don't have any more RnR.
Every suggestion is good.
*The STM32F103 chip uses Arduino and no problems. Software, BOB driver is a problem.
Sterob,
I'm well known for electric noise but this is not the first machine I'm working on, but the first is this BOB model.
I tried a few computers that were only connected to a USB cable and...
I also tried with USB cable to a heavy shielded (as in the amazon link) but the same problems.
USB Chip STM32F103.
424246
and installed his driver. In Device Manager, I deleted the PCI...
I have a problem with this BOB. I made all the settings according to the instructions, but the USB is occasionally lost, making it slow.
I am interested in how to connect THC
WIN7 / 63 (tried with...
Thanks Christian
I tried with 6 different computers and one laptop. With this configuration, it works but occasionally loses USB or freezes.
424214 424216 424218
All settings are set according to the manual. The problem is with the PCI driver.
Win7 Ultimate 64
424206 424208 424210
Thanks Christian.
Do you know what .dll for this BOB?
424136
RnRMotion.dll not work.
Thank you very much but the machine is not the same.
Does anyone have a circut diagram or a photo of this PCB. Unknown pieces crowned red in the photo.
Saf Nertajet125
407450
Thanks!
Darkoford
Sorry, my machine uses Burny 10.
What software was on the machine?
Thanks moepunk.
I did somehow repair the electronics but still look for schematics.
The program on the Burny 10 and NT Win 2000 machine. The program problem is that we do not have a password so I...
I temporarily solved the problem and found the wires in the break but I'm still looking for a service manual.
Do not I clear what companies like SAF are that they can not get or buy service...
Hi everyone.
I have a problem with Burny 10 with Admin Password. The serial number in the back is not valid as in some older models.
Please help if someone knows how to solve this problem.
Thank...
I need a schematics and a service manual for this machine.
366734
366736
Thanks!
Darkoford
Thanks for your reply.
Exactly what I'm doing or use the "bridge frame".
Interesting device, I'll definitely consider buying.
Thanks Jason.
Thanks Jason!
What is this device? Please link, name or image.
Is still not clear the problem?
Part of the sheet that I cut because of temperature shifts on the table. The figure shows how much goes severed part.
254506
https://www.youtube.com/watch?v=OVOaitrjnzs&feature=youtu.be
No one cuts the sheet does not cut sheet in this way ???
Hi everyone!
This is my first post and thanks to your experience and advice I made a CNC metal cutting and CNC Flame.
254216[/ATTACH]254218]
Mach3
X=12000mm
Y=2000mm