Search:

I find a quicker spindle speed works with the small drills I was putting a 2mm hole in 304 today. 2000 rpm and about .015 mm pr. It takes time but I did 25 holes 37 do try using a shorter drill first...

Yes I can do other formats if you like (dgn,dft,dwg) if you pm you email I will send them to you.

Sent from my R800i using Tapatalk 2

If you can open the ppf file in the part modeler then from there save it a a iges file then into solidedge.

Sent from my R800i using Tapatalk 2

I had a similar alarm on my Haas we replaced the vector drive and that solved the problem.

Sent from my R800i using Tapatalk 2

I had a similar problem when edgecam was using a lace cycle then drilling straight after.
Have you selected your plane
(G17 XY PLANE)
Should be set as standard
And I think G21 is metric.
...

i font useing a button mill to rough out most of the material is best then finish with a carbide cutter.
button mill S & F's
S900 feed of F380 thats metric
depth of cut is 1mm - 1.25mm
carbide...

what about from the uk can i apply.

hi i need a post processor for a haas vf3 with 4th axis

hi i need a post for a haas vf3 with 4th axis on edge cam 10.5.
thank you

the die box is in a sleeve in a tool postion. i have no way of making it float.
single point threading i am unsure what this is?
sorted now turned them down and put them in the capston.
only 140...

setting is on did not work ripped all the thread on return.
my problem is i have to do a 3/8 unc on 316 s/s 58mm long and with a insert i get .4mm push off so though die box would be the answer.

hass have a good control but poor build and make sure you buy a mop if you get a haas.
but easy to program lots of short cuts.

is there anyway of setting a die box on a sl10 that can multi pass like a G84 with a dwell. thank you