https://www.cnczone.com/forums/attachment.php?attachmentid=501382&stc=1
Here is picture of a plate that i made after a simulation in cad software , all is working now , and i can use the turret ....
Type: Posts; User: Andreiir
https://www.cnczone.com/forums/attachment.php?attachmentid=501382&stc=1
Here is picture of a plate that i made after a simulation in cad software , all is working now , and i can use the turret ....
As is stated in title i need a operator manual for fanuc 3t , or something similar .
Thanks to all , and wish u all the best .
U connected wrong wires .
If ur driver have pin 7 dir + u need to connect to 5v wich is conected to bob , else u can use 12 v , but i think u need a resistor , and if u use 24 v u shure need an...
Hi , i need digicontrol ems4.CP02B manual, tis they site https://www.digicontrol.info/en/products/system-automation-and-control/digicontrol-automation-equipment/
maibe someone have acces and can...
Ur mail ?
- - - Updated - - -
This is for fanuc , not for siemens .
I bought an cnc lathe roeperwerk fanuc 3t , 1989 , and the turret have some missing parts .
Turret is 05.480.316 .
What i miss is the middle plate where stands the motor , the encoder , sensor ,...
Do u need them ?
I will make my point of view , u cant compare some belts with a rack and pinion , for ur need belts are ok , if u dont seek good tolerances , for hobbie work and how much they cost is fine , but for...
if u make a cnc to look nice and have no utility , then u can use the most beauty contest components , but if u make a cnc to work with it , u need to make it the most stiffnes u can achieve with...
If u give me the right font i can help u with all u need . Just need the font , and the size in metric , so i can scale to size .
Nvum is a piece of XXXX, dont buy that , for the money u can buy a real solution like uc300 eth , or 400 eth , no usb , no interference , no freeze ...
At 300 micron this is good enough for wood .
Interesting point with torsion , but why 3 is not better tan 3 or 4 , why in industrial machines there is aproximatley all time used 3 ? How can be more resistant to torsion 456 than 3 or 2 or 1 ?...
U are milling components on rails ?
Why u put a comparator on rails , and show us that u have a little backlash .
What is earth u can make an patent on this , all what u do is long time on internet...
There are solutions , search for kimla fiber laser can have speeds to 5m/s and 6G , the best way to achieve 2m/s is with linear servo , but there are more expensive , and the co2 tube i dont think...
U need a a maxim 200w servo system, with 750w , u make an rocket launcher .
But if u use a servo u need to make a rigid build , because they are high acceleration and deceleration , and the build...
Dnt worry there are only 4 wire for usb connection , u go to store and buy a 3 or 5 meter usb charging phone cable , usb data , that u think is good quality , after that u open the dongle , cut the...
Change the usb cable with a high quality cable , maibe urs is not ground shield.
Every one have opinions , there are tests made with measurements , and the damping properties on frequencies vibration with eg are true , they are more signifiant when u use a steel construction , vs...
Soo funny , u cant compare stepers with servo , and the statements that u are shure that are company that make stepers that never lose stepes in 20 years show that u are not from this world , and...
Fiber laser are more expensie than co2 and i think a co2 laser will do same work , but slower , the main benefit it is more cheap .
It is more easy to use , after u learn it a little .
U can try aspire , it has all u need like engraving , v carving , 3d , rotary axis .
Friend , with a transformer it will work ok , the spindle doesn't draw that much current , only when it starts get a peak , after stay under 300w , depending on rpu u use , if u go lower it consume...
Yes i think this will work , u need for uc300 eth a breackboard to connect it to servo , u need this in order not to burn the cpu of uc300 eth and protect it .
Mach 3 4 are obsolete , they cant compete uccnc , and ot cost u only 55 euro for software .
Try uccnc or linux cnc .
I used vinegar i let it about half hour , and scratch with a wooden chop part.
This way i think u dont attack too much the steel , anyway it is attacked by rust .
After u finish , clean with a...
Hi.
When i saw this tittle i was thinking lets see a nice precise and stiff , and powerful construction .
But when i saw design and the precision requirement , i was thinking WTF is precision now ,...
They lose steps , and dont recover if u go faster , but if u go slow then they dont lose steps , only main think is that are working more silent , and a litte faster than open loop .
The closed loop...
I think a nema 34 will suit ok for all this forces , or a nema 23 with a reducer .