Hi guys. I'm hoping I can find someone who's more familiar with these drives then I am.

We have an old Sector plasma table with 3 Servostar s300 HR 3.01 drives on it, and one of them went bad. We got a used one in, and I've spent a lot of time installing it with limited knowledge about them.

The new (used) drive had an incompatible firmware, and I've updated it with the the firmware specific to that Hardware Revision (3.89) from Kollmorgen's website, but now the other two drives are flashing F29 after SERCOS tries to fire up. The other 2 drives are on revision 1.34, and I assume that this means that I should update the other two drives to match the newer firmware, but this is an irreversible procceedure, and I'm hoping someone with experience can tell me if I should or not.

I've reached out to Sector, but these drives are so old, not too many people are familiar with them, and Kollmogen got mad at us because we didn't buy the drive directly from them lol.

Fingers crossed one of you geniuses can help me out.


Thanks!