528,351 active members*
3,138 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > Multicam Machines > SF Model w/ Updated Pendant Style Controller, lost program
Results 1 to 4 of 4
  1. #1

    SF Model w/ Updated Pendant Style Controller, lost program

    Recently purchased an SF model that has the new controller installed on it (pic attached). I'm new to Multicam, been using a GRBL machine. I managed to get my laptop connected to the machine and was messing around in MotionMechanics. I was trying to locate the file directory for storing files. Long story short I went to File -> Store File and uploaded a simple G-code file where the program should be. Big mistake, gut hurts thinking about it. Can anyone help w/ getting a program installed back on the controller? I would really appreciate any help you can provide. Thanks.
    Attached Thumbnails Attached Thumbnails 20200821_134400.jpg  

  2. #2

    Re: SF Model w/ Updated Pendant Style Controller, lost program

    Found a video where I had the startup, shows it loading up RPD24 Driver Module Version 1.25.

  3. #3

    Re: SF Model w/ Updated Pendant Style Controller, lost program

    This is where (see pic) I sent a standard G-code text file to in MotionMechanic. Can anyone confirm that I overwrote the controller program? In times like this a man needs an UNDO button. Thanks folks.

  4. #4
    Registered
    Join Date
    Jun 2010
    Posts
    437

    Re: SF Model w/ Updated Pendant Style Controller, lost program

    Jimmy

    When you get a chance give me a call I might be able to help you out.

    Maurice
    MCP Service
    678-5481-483

Similar Threads

  1. Call Updated Sub Program
    By nodochau in forum Okuma
    Replies: 4
    Last Post: 02-18-2020, 02:54 PM
  2. Photos of wood boxed cnc + Pendant usb steampunk style
    By juppiter in forum Uncategorised MetalWorking Machines
    Replies: 5
    Last Post: 12-29-2012, 09:13 PM
  3. Updated plugin available for the ShuttleRU pendant
    By AiR_GuNNeR in forum Mach Wizards, Macros, & Addons
    Replies: 0
    Last Post: 12-06-2011, 01:39 AM
  4. Just got my updated super Pid controller
    By msimpson99 in forum DIY CNC Router Table Machines
    Replies: 13
    Last Post: 12-22-2010, 10:35 AM
  5. Updated Lost Foam Casting - Web Page
    By FrankG in forum Casting Metals
    Replies: 8
    Last Post: 02-19-2005, 01:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •