504,045 active members
4,679 visitors online
Register for free
Login
Page 1 of 2 12
Results 1 to 12 of 18
  1. #1

    Share post processor

    Share post processor

  2. #2

    Re: Share post processor

    .

  3. #3
    Junior Member
    Join Date
    Aug 2014
    Posts
    2

    Re: Share post processor

    thanks

  4. #4
    Registered
    Join Date
    Aug 2008
    Posts
    303

    Re: Share post processor

    Thank you sir anyone have any mazak posts?

  5. #5
    Registered
    Join Date
    Sep 2015
    Posts
    2

    Re: Share post processor

    thank very much

  6. #6
    Registered
    Join Date
    Sep 2014
    Posts
    1

    Re: Share post processor

    anybody have post for five axis to referen or any document? Please share ....thanks!

  7. #7
    Registered
    Join Date
    Aug 2004
    Posts
    217

    Re: Share post processor

    Any post available for 2006 Doosan 2000sy with Fanuc 18i-TB control.

    Thanks for any help at all!

  8. #8
    Registered
    Join Date
    Feb 2009
    Posts
    36

    Re: Share post processor

    I've got an old Hurco MHP-30 (BMC-30), running Dynapath controller. I've found a MCX6 post for the Dynapath 10/20. Would that work for the Hurco, or would I need to mod it for it to run the Hurco? I've read that this older Hurco has an "odd" programming/post syntax, but I'm not sure if that's a comment based on the Dynapath side of things, or the Hurco side of things.

  9. #9

    Re: Share post processor

    i need 5 axis post processor for powermill friends!! Do you have??

  10. #10
    Registered
    Join Date
    May 2018
    Posts
    4

    Re: Share post processor

    thanks

  11. #11
    Registered
    Join Date
    May 2018
    Posts
    4

    Re: Share post processor

    Thanks men

  12. #12
    Registered
    Join Date
    May 2018
    Posts
    4

    Re: Share post processor

    hi friend
    i need help

    im searching the post processor for ACRA FVMC-610 CONTROL MELDAS 500.
    could you help me please.

Page 1 of 2 12

Similar Threads

  1. pls share me the post of EDM Fanuc. use Mastercam x6.
    By vietphuock04 in forum General EDM Discussion
    Replies: 2
    Last Post: 10-22-2012, 05:17 PM
  2. Post to share
    By vincent.pomerleau in forum CamWorks
    Replies: 4
    Last Post: 04-26-2012, 09:46 AM
  3. Why doesn't anyone share post processor files.
    By keystone76 in forum Post Processor Files
    Replies: 14
    Last Post: 01-27-2011, 02:17 PM
  4. ok share the knowledge share the wealth...huh...right
    By oaktree444 in forum General Metalwork Discussion
    Replies: 9
    Last Post: 10-18-2005, 10:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •