Originally Posted by
jjhawg
Thanks for everyone's input, I can now present the resolution.
I have been scouring the Fanuc manual and found parameter 45.7, HSIF.
It was set to zero; M/S/T/B code precessing shall be a normal interface.
I changed it to one; M/S/T/B code precessing shall be a high-speed interface.
I would like to know what this controls, but regardless, after this change all of the freezing problems vanished,
However, this did NOT fix the ATC not working, so I will start a new thread to work on that.
Thanks,
Jim