It would work, but make sure you use stranded CAT5, but it's not normally shielded which is desirable. On the other hand, a line driver output (differential quadrature) is pretty much noise immune.Originally Posted by lavrgs
I normally use a 9 conductor shielded serial cable, just cut the ends off as needed. More flexible than CAT5.
Results 21 to 24 of 24
-
04-18-2021, 06:41 AM #21
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: J325 with BEI Encoders reused in retrofit
Jim Dawson
Sandy, Oregon, USA
-
04-19-2021, 06:24 PM #22
Member
- Join Date
- Aug 2008
- Posts
- 228
Re: J325 with BEI Encoders reused in retrofit
I started ordering parts for Retrofit 2.0. Going with DMM AC servo kit and Centroid Acorn. Will start a build thread since I have some items I need help with... off tofind an old serial cable - thanks Jim
-
04-19-2021, 07:33 PM #23
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: J325 with BEI Encoders reused in retrofit
My pleasure !
Jim Dawson
Sandy, Oregon, USA
-
04-19-2021, 09:49 PM #24
Member
- Join Date
- Aug 2008
- Posts
- 228
Re: J325 with BEI Encoders reused in retrofit
For questions specific to upgrading the J325 I will concentrate on another post HERE https://www.cnczone.com/forums/tree/...are-forum.html
Reply With QuoteSimilar Threads
-
Want Anilam Z-Axis Encoder BEI
By calmissile in forum Want To Buy...Need help!Replies: 0Last Post: 09-04-2018, 05:49 AM -
BEI encoder replacement
By Goslowjimbo in forum Servo Motors / DrivesReplies: 3Last Post: 01-28-2017, 09:02 PM -
BEI Encoder trouble
By legendboy in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 09-13-2014, 03:23 AM -
WTB:Bei Servo encoder disc 73-250 B
By thork in forum Want To Buy...Need help!Replies: 10Last Post: 11-19-2011, 10:47 PM -
Are these Litton encoders worth re-using in a retrofit?
By Jackal66 in forum Servo Motors / DrivesReplies: 6Last Post: 04-21-2011, 10:58 PM
Tags for this Thread
Posting Permissions
