584,800 active members*
4,389 visitors online*
Register for free
Login
Results 1 to 15 of 15
  1. #1
    Join Date
    Jul 2019
    Posts
    11

    Mazak Integrex 70

    Hello everyone, please help, machine mazak integrex 70.Control system Mazatrol T plus. Cannot perform tool change. Who knows how to write a tool change command correctly? In MDI mode, enter T0101, there is no reaction. Help me please

  2. #2
    Join Date
    Oct 2016
    Posts
    106

    Re: Mazak Integrex 70

    Add M6


    Sent from my D5803 using Tapatalk

  3. #3
    Join Date
    Jul 2019
    Posts
    11

    Re: Mazak Integrex 70

    Quote Originally Posted by tspiszak View Post
    Add M6


    Sent from my D5803 using Tapatalk

    Does not react at all, the very fact that he read the command, and did not work. And you do not know, do you have to drive yourself to the tool change point? or is he himself? The machine does not even move, only the coordinates blinked on the counter, as if it had worked for something, but in fact, nothing happened.

  4. #4
    Join Date
    Oct 2016
    Posts
    106

    Re: Mazak Integrex 70

    Try T000t0m6, second t is to preload next tool.

    Sent from my D5803 using Tapatalk

  5. #5
    Join Date
    Jul 2019
    Posts
    11

    Re: Mazak Integrex 70

    Quote Originally Posted by tspiszak View Post
    Try T000t0m6, second t is to preload next tool.

    Sent from my D5803 using Tapatalk
    I tried T001T002M6, nothing happened

  6. #6
    Join Date
    Oct 2016
    Posts
    106

    Re: Mazak Integrex 70

    Does it work in auto mode?

    Sent from my D5803 using Tapatalk

  7. #7
    Join Date
    Jul 2019
    Posts
    11

    Re: Mazak Integrex 70

    Quote Originally Posted by tspiszak View Post
    Does it work in auto mode?

    Sent from my D5803 using Tapatalk
    No theey does'not .

  8. #8
    Join Date
    Oct 2016
    Posts
    106

    Re: Mazak Integrex 70

    Call mazak

    Sent from my D5803 using Tapatalk

  9. #9
    Join Date
    Jul 2018
    Posts
    31

    Re: Mazak Integrex 70

    Hello,
    Is there a tool inside the electrospindle ? if yes then,
    T1xx is the command for unloading the tool, where T1 is electrospindle number and xx is the tool number.

    Example:
    ISO = T101M6 tool 1 loading demand from the spindle1.
    ISO = T116M6 tool 16 loading demand from the spindle1.

    Also you need to check the inputs from the spindle like, tool lock/unlock, tool present/abscent, tool sensor on magazine. Does it shows any error on screen ?
    regards.

  10. #10
    Join Date
    Jul 2019
    Posts
    11

    Re: Mazak Integrex 70

    Quote Originally Posted by coc9 View Post
    Hello,
    Is there a tool inside the electrospindle ? if yes then,
    T1xx is the command for unloading the tool, where T1 is electrospindle number and xx is the tool number.

    Example:
    ISO = T101M6 tool 1 loading demand from the spindle1.
    ISO = T116M6 tool 16 loading demand from the spindle1.

    Also you need to check the inputs from the spindle like, tool lock/unlock, tool present/abscent, tool sensor on magazine. Does it shows any error on screen ?
    regards.

    The M6 command unclenches the cams, so this command cannot be used to change the tool.

  11. #11
    Join Date
    Jul 2018
    Posts
    31

    Re: Mazak Integrex 70

    Did you check for sensor inputs ? And any errors on screen ?

  12. #12
    Join Date
    Jul 2019
    Posts
    11

    Re: Mazak Integrex 70

    Quote Originally Posted by coc9 View Post
    Did you check for sensor inputs ? And any errors on screen ?
    what sensor check for inputs ?
    No errors . Maybe the error is that the command to change the tool is not correctly entered? There are 2 tool stores

  13. #13
    Join Date
    Jul 2018
    Posts
    31

    Re: Mazak Integrex 70

    I havent worked on this machine but in order for machine to know which tool is where, or if the tool is present on the holder/tool carriage/spindle there are sensors which send signals to the PLC (Programmable Logic Controller) so that when present/or absent (which ever is required) the machine does the further work. But when the required signal is absent the machine stops and (if programmed) give certain errors.

  14. #14
    Join Date
    Jul 2019
    Posts
    11

    Re: Mazak Integrex 70

    Thank you all, the problem has gone away to the decisions of the correct syntax for programming a tool call, namely T9000.8, which corresponds to tool number 9 in horizontal mode.

  15. #15

    Re: Mazak Integrex 70

    Quote Originally Posted by endaeron View Post
    Thank you all, the problem has gone away to the decisions of the correct syntax for programming a tool call, namely T9000.8, which corresponds to tool number 9 in horizontal mode.
    what year is your integrex? mid 90s?

Similar Threads

  1. Mazak Integrex 70
    By endaeron in forum Turning Machines
    Replies: 1
    Last Post: 10-02-2019, 10:38 AM
  2. mazak integrex 200-ii sy
    By bmatty2001 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 10-29-2013, 11:07 PM
  3. Mazak Integrex 35
    By GCODE_FAN in forum Mazak, Mitsubishi, Mazatrol
    Replies: 2
    Last Post: 06-17-2013, 11:39 AM
  4. Mazak Integrex 200 IV
    By Techman2 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 04-20-2012, 05:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •