584,817 active members*
4,802 visitors online*
Register for free
Login
Results 1 to 16 of 16
  1. #1
    Join Date
    Jun 2010
    Posts
    0

    GILDEMEISTER with grundig eltropilot controller

    hi
    i have a turn by:
    maker:GILDEMEISTER
    type:ctx 200
    controller:grundig eltropilot
    but all of manuals & language of controller is german
    is there anyone help me?
    english manual?
    excuse me for my english
    thanks very much

  2. #2
    Join Date
    Mar 2008
    Posts
    4

    same

    Quote Originally Posted by russel1712 View Post
    hi
    i have a turn by:
    maker:GILDEMEISTER
    type:ctx 200
    controller:grundig eltropilot
    but all of manuals & language of controller is german
    is there anyone help me?
    english manual?
    excuse me for my english
    thanks very much
    hi:
    i have same problem if you found any english catalog .
    i need?
    tanks

  3. #3
    Join Date
    Mar 2008
    Posts
    4
    --------------------------------------------------------------------------------

    hi
    i have a turn by:
    maker:GILDEMEISTER
    type:ctx 200
    controller:grundig eltropilot
    but all of manuals & language of controller is german
    is there anyone help me?
    english manual?
    excuse me for my english
    thanks very much

  4. #4
    Join Date
    Oct 2006
    Posts
    11

    EPL 2

    Hi,
    how are you?
    You can change the language of the controller to English, in menu DIAGNOSE.

    Regards,

  5. #5
    Join Date
    Mar 2008
    Posts
    4
    Quote Originally Posted by booster05 View Post
    Hi,
    how are you?
    You can change the language of the controller to English, in menu DIAGNOSE.

    Regards,
    hi:
    please expention for me?
    how i can change language by DIAGNOSE.
    VERY VERY TANKS

  6. #6
    Join Date
    Oct 2006
    Posts
    11
    hi,
    how are you?
    On next monday i will give you the steps.
    I need to see first in my machine.
    Send me one email and i will give you the steps with photos, it's better.

    [email protected]

    Regards,
    Paulo

  7. #7
    Join Date
    Feb 2013
    Posts
    0

    GILDEMEISTER CTX 400 E

    Hi, help needed

    Gildemeister CTX 400 E, with controller Grundig EltroPilot 1190.
    Up to speed 900 rpm. spindle stops normally. At higher speed emergency stop occurs and machine coast down without braking. Error message "spindle does not reach setpoint speed".

    Thanks to anyone for the advice

  8. #8
    Join Date
    Oct 2006
    Posts
    11
    Dear Sir,

    I had a problem with the drive spindle, when slowed down the velocity of the spindle gave me the error F-41 in the drive.

    I had to replace the capacitors in the drive of the spindle.

    Attached is the list of errors

    Regards,
    Paulo
    Attached Files Attached Files

  9. #9
    Join Date
    Feb 2013
    Posts
    0
    Dear Sir,

    Thank you for advice.

    Measured capacitance is 1330mkF. But I try replace the capacitors.

    Error message
    IPO F:710 Channel1: Spindle does not reach setpoint speed
    and following
    SPS F:253 Spindle drives: General fault

    Did anyone have description of cause and remedy.

    With best regards
    Tony




    Quote Originally Posted by booster05 View Post
    Dear Sir,

    I had a problem with the drive spindle, when slowed down the velocity of the spindle gave me the error F-41 in the drive.

    I had to replace the capacitors in the drive of the spindle.

    Attached is the list of errors

    Regards,
    Paulo

  10. #10
    Join Date
    Jan 2007
    Posts
    8
    I need the manuals too, if anyone have them please PM me or post them here. Thank You!

  11. #11
    Join Date
    Jul 2016
    Posts
    108

    Re: GILDEMEISTER with grundig eltropilot controller

    Quote Originally Posted by nylas View Post
    I need the manuals too, if anyone have them please PM me or post them here. Thank You!
    Dear sir
    can you find any document or solution on this case?

    best regards
    Russell

  12. #12
    Join Date
    Jul 2016
    Posts
    108

    Re: GILDEMEISTER with grundig eltropilot controller

    Quote Originally Posted by Russell840 View Post
    Dear sir
    can you find any document or solution on this case?

    best regards
    Russell
    to change the system controllers language _ Elrtopilot to english :

    first of all, you need to know : Does your controller support english language?

    If the answer is yes , you should to go :

    Press Operation key ==> Diagnose ==> Press " > " key to go to next page

    press " SPRACHE 2 " ( Number 5 key )

    The language is English Now.

    best regards

    Russell

  13. #13
    Join Date
    Aug 2018
    Posts
    1
    Hi,
    I have Gildemeister CTX 200 with Eltro Pilot controller.
    Could someone send me an example program for threading?
    No I'm moving with G33.
    Thank YOu

    Peter

  14. #14
    Join Date
    Jul 2020
    Posts
    1

    Re: GILDEMEISTER with grundig eltropilot controller

    Hi!

    I just checked this old page.
    Do you still need help with EltroPilot?

    Regards

    Krisztián

  15. #15

    Re: GILDEMEISTER with grundig eltropilot controller

    Quote Originally Posted by stollerk View Post
    Hi!

    I just checked this old page.
    Do you still need help with EltroPilot?

    Regards

    Krisztián
    Hello
    I am looking for someone who has good knowledge of ELTROPILOT L2 control. I have a Gildemeister MD5 shaft lathe that has been giving problems but just recently is displaying excessive heat alarm P422
    Can you help or do you have any information on the alarms

    thank you
    Regards
    dave (1Nipper)

  16. #16

    Re: GILDEMEISTER with grundig eltropilot controller

    Does nay one know of any people that can support (Electric/electronic) the Grundig ELTROPILOT L2 control. This one is fitted to a Gildemeister MD% Shaft lathe (1992). I have tried Heidenhain UK and DMG Mori in the Uk - both say they do not support this product.
    I have a set of manuals, but I dont have any listings for the control alarms that can be displayed - are there any knowledgeable service people that can help? Thank you
    Regards
    Dave.

Similar Threads

  1. Restore dos on Grundig Numeric
    By oyvind in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 02-01-2023, 03:31 PM
  2. Gildemeister NEF CT-60
    By ragunath400 in forum Controller & Computer Solutions
    Replies: 0
    Last Post: 05-11-2014, 08:16 AM
  3. Gildemeister CTX 400 Controller Eltropilot
    By Slaptas in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 09-05-2013, 12:20 PM
  4. dmg with grundig controller
    By russel1712 in forum Controller & Computer Solutions
    Replies: 0
    Last Post: 07-09-2010, 08:33 PM
  5. Gildemeister T-42
    By lonely in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 10-27-2008, 01:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •