[rlaury]

Hi All

Just purchased a PM-728 VT and I want to retrofit it to CNC. PM has a kit in the works, but It's going to
be awhile before it's available. Anyone else offering a kit?

Thanks
RonL

[cncmakers001]

Hi All

Just purchased a PM-728 VT and I want to retrofit it to CNC. PM has a kit in the works, but It's going to
be awhile before it's available. Anyone else offering a kit?

Thanks
RonL

Hi Laury, what is the required motor sizes of XYZ axis and spindle? by KW or NM.

[rlaury]

X and Y will be NEMA 23 Z will be a 43. All Clearpath.

[joeavaerage]

Hi,
Clearpath are good quality and have good support but are expensive.

Take a look at Delta (Taiwanese brand manufactured in China) or DMM (Canadian brand manufactured in China) which are also good quality
with good support and documentaion and four times the power for the same or less money. Delta and DMM have vastly more IO and
control modes in addition. Clearpath have been made simple to hook up but that comes with a cost, very little IO and basic control modes only.



Craig

[noraaustin72]

This machine is damn good For More Rigidity, And greater cutting ability, I really personally like it,you also can easily control it by hand, its a worth buying machine
its kit is availabe on many online stores, have you searched on online stores?
if you are confused to buy from any online stores, then I recommend you few, these are Aamzon, coupon codify, and ebay.

[mrosso]

Has anyone created a 3D model of the PM-728vt?

[Bcap63]

ProcutCNC has a complete setup for sale.
https://procutcnc.com/collections/pm...-w-o-enclosure