584,800 active members*
4,815 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2018
    Posts
    12

    How to disable M62

    I have a MK2 controller on my CNC router. I am in the process of adding a laser to it. I need a 15-sec delay at spindle start for the bit to spin up, but I do not want a delay when I use the laser. If I use M62 to fire the laser, how do I turn it back off? Is there a better way to do this?

  2. #2
    Join Date
    Nov 2015
    Posts
    257

    Re: How to disable M62

    In the settings you can set how long you wait after a spindle start.

    Otherwise, I don't know if the TNG v2 software can do that, but give it a try.

    M62 Turn on digital output synched with motion
    M63 Turn off digital output synched with motion
    M64 Turn on digital output immediately
    M65 Turn off digital output immediately

  3. #3
    Join Date
    Aug 2018
    Posts
    12
    Quote Originally Posted by tantemay View Post
    In the settings you can set how long you wait after a spindle start.

    Otherwise, I don't know if the TNG v2 software can do that, but give it a try.

    M62 Turn on digital output synched with motion
    M63 Turn off digital output synched with motion
    M64 Turn on digital output immediately
    M65 Turn off digital output immediately
    Thanks, I didn't think I could run TNG with a MK2 board. I'll have to try this with a demo installation...

  4. #4
    Join Date
    Mar 2017
    Posts
    1295

    Re: How to disable M62

    Mk2 will not work with TNG.
    You can use M62 to turn output on and off.

Similar Threads

  1. how can i disable air on this little one ?
    By deadlykitten in forum Okuma
    Replies: 10
    Last Post: 08-28-2016, 11:21 AM
  2. VSD-A Disable Pin
    By JerryFlyGuy in forum CNC Machine Related Electronics
    Replies: 8
    Last Post: 09-01-2011, 11:58 PM
  3. G203v disable pin
    By kae in forum Gecko Drives
    Replies: 4
    Last Post: 02-17-2010, 02:55 AM
  4. How do you disable SMI?
    By CROSSHATCH in forum LinuxCNC (formerly EMC2)
    Replies: 3
    Last Post: 03-04-2009, 10:22 PM
  5. Disable with Mach
    By belli in forum Mach Plasma / Laser
    Replies: 3
    Last Post: 07-14-2007, 09:53 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •