584,846 active members*
3,994 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2004
    Posts
    323

    Better guide rail dust covers

    I've been a little unhappy with the plastic guide rail dust covers that come with the Avid pro machines. The problem is that my shop is an unconditioned steel building, so it suffers from temperature extremes of 20s in the winter to 115 in the summer (with 40 degree daily swings). Those plastic covers tend to expand and warp up in between the hold down bolts. Picture below. So I decided to get some 1/4" aluminum stock and machine ( on the CNC... "machines building machines!") them as replacements.

    I modeled them in Fusion 360 and made recessed bolt holes similar to the plastic covers. Of course, I also need to cut a dado on the underside at 3/4" by 1/8" to allow clearance for the guide blocks. At first I tried doing this on the table saw (both vertically with an aluminum blade, then flat with a dado blade), but holding them down consistently proved to be a problem (not to mention that it generated aluminum flakes that I'll be cleaning up for a month....).

    So I finally ended up just putting it back on the CNC and machining the dado 1mm x 1.5mm on each pass. (Sorry, forgot to pictures of that).

    Below are all the pictures and final results, very happy with it!

    Bits used:

    Amana tool: #561776 - 1/4 O-flute aluminum

    Accupro: #43027382 - 1/4 x 2 x 4 3 flute aluminum

    Attachment 479810

    Attachment 479812

    Attachment 479814

    Attachment 479816

    Attachment 479818

    Attachment 479820

    Attachment 479822

  2. #2
    Join Date
    Dec 2020
    Posts
    167

    Re: Better guide rail dust covers

    Well done!

  3. #3

    Re: Better guide rail dust covers

    did you think about use this type cover ?

  4. #4
    Join Date
    Apr 2004
    Posts
    323

    Re: Better guide rail dust covers

    Quote Originally Posted by allencncrouter View Post
    did you think about use this type cover ?
    Not even. Keeping it simple like the original design.

Similar Threads

  1. V-Rail vs Linear Guide Rail
    By dbcheek in forum Avid CNC
    Replies: 5
    Last Post: 03-06-2019, 10:42 PM
  2. Linear guide rail question
    By janz99 in forum Linear and Rotary Motion
    Replies: 21
    Last Post: 06-21-2015, 04:37 AM
  3. DIY Rail Covers or Just Going NAKED!
    By Plugger in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 05-20-2011, 09:26 PM
  4. Questions on rail covers, dual servo hunting,and rail preload
    By Plugger in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 05-14-2011, 05:00 AM
  5. Dust covers (boots)
    By Kev in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 03-30-2004, 01:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •